Adipose-Derived Stem Cells in Bone Tissue Engineering: Useful Tools with New Applications

3.1. Decellularized Matrices

Scaffolds derived from acellular matrices have several advantages. They have a structure similar to that of the original bone extracellular matrix; they can recapitulate the complex microenvironment of naïve bone, and they have shown significative osteoinductive capacities [74]. These materials require a donor tissue and present the possible risk of transmission of infectious diseases as the main drawback [75].

ASCs have been used together with acellular matrices from different sources. Allografts and xenografts have been derived mainly from bone tissue [55, 58, 60, 76, 77] but also from small intestine submucosa [57] or from adipose tissue [59].

Ko et al. tested a nanostructured tendon-derived scaffold on a mouse model of calvarial critical-sized bone defects together with human ASCs (hASCs). hASCs seeded on this nanostructured tendon-derived scaffold had an enhanced focal adhesion and an increased osteogenic differentiation after 21 days. The same construct was layered on the mouse calvarial defects, ultimately obtaining well-vascularized bone tissue and a defect closure in 8 weeks [56].

Liu et al. [58] combined hADSC with a deproteinized bone matrix, derived from New Zealand rabbits. The heterogeneous deproteinized bone (HDB) has no severe immunogenicity, and it holds a natural porosity adequate for cell adhesion proliferation and differentiation [78]. Composites with HDB were obtained both with naïve hASCs and with hADSC which have already undergone a partial osteogenic differentiation. The constructs were tested on a murine 4 mm-long radial bone defect. Both types of HDB-ASC composites showed a strong osteogenic ability when compared to control groups, at four and eight weeks. The best performance was obtained by the HDB-ASC constructs combined with osteogenic ASCs which filled the bone defect area and were practically indistinguishable from the host bone tissue.

Porcine small intestine submucosa (SIS) was also investigated as another option for bone tissue engineering in a mouse calvarial defect model [57]. The SIS scaffold was initially seeded with osteoblasts from the MC3T3-E1 cellular line in order to obtain ECM deposition. After four weeks, the ECM-SIS scaffold was decellularized. hASCs seeded on the ECM-SIS scaffold underwent osteogenic differentiation even in the absence of the osteogenic differentiation medium. They were significantly more efficient in bone tissue formation when compared to those seeded in the SIS-only scaffold. The murine model confirmed these in vitro data. In mice, constructs made of ECM-SIS plus hADSCs had the best performance in comparison to scaffolds alone and also to ADSCs seeded on SIS-only scaffolds.

Among human allogenic materials, Wagner et al. [60] tested a construct made of decellularized human cancellous bone seeded with hASCs, both in vitro and in a murine femur model with a critical-sized defect. The scaffold was able to increase the osteogenic differentiation of hASCs when compared to controls. In the murine model, after four weeks, seeded scaffolds showed a significative higher formation of vital bone in comparison to unseeded controls Moreover, the scaffold showed optimal osteoconductive properties and favored both the differentiation of hASCs into CD31+ endothelial cells and an increased neoangiogenesis.

In a study by Vériter et al. [55], an ASC-based product was created combining ASCs and human demineralized bone matrix (DBM) which has powerful osteoinductive properties.

ASCs at passage four were incubated with an osteogenic differentiation medium for 15 to 18 days and then added to DBM. These grafts were implanted on 11 patients with bone nonunion from different etiologies, including postoncological reconstructions and congenital defects. No serious adverse events or oncological recurrences were reported during the follow-up of 54 months. The grafts were fully integrated, determining the healing of the bone nonunions.

Adipose tissue was also reported as a potential candidate for a scaffold intended for bone reconstruction. Guerrero et al. [59] cultivated human adipose tissue from liposuction for three weeks in a proliferation medium on agarose-coated plates in order to obtain a construct called Adiscaf. Adiscaf was confronted with a collagen scaffold (Ultrafoam) seeded with a monolayer of ASCs from the same patient. Both Adiscaf and the collagen construct were held for four weeks in a chondrogenic differentiation medium. Adiscaf differentiated into cartilage tissue with the synthesis of glycosaminoglycans and type II collagen. When implanted into a subcutaneous pouch on nude mice, the cartilage tissue formed into the Adiscaf was able, after eight weeks, to produce a higher amount of mineralized tissue compared to Ultrafoam-based constructs. The ectopic bone formed through endochondral ossification, and Adiscaf was superior to Ultrafoam both in vitro and in vivo, thus being a possible candidate for the generation of osteogenic grafts for bone repair.

3.2. Ceramics

Several synthetic materials, derived both from inorganic and organic origins, have been tested together with ASCs as scaffolds for bone tissue engineering.

Calcium phosphate ceramics (e.g., hydroxyapatite (HA), coralline-derived hydroxyapatite (cHA), tricalcium phosphate (TCP), calcium sulfates, glass ceramics, calcium phosphate-based cements, and bioglass) have been introduced about 40 years ago as bone substitutes [54, 79]. They have excellent osteoinductive properties [80, 81], and they have been used alone to treat distal radial fracture [82, 83], but they have the relative disadvantage of a high brittleness, TCP in particular [84]. Therefore, it could be problematic to use ceramics, especially when a construct for load-bearing areas is needed [85]. The combination of calcium ceramics together (e.g., HA and TCP) or mineral substitution with strontium or magnesium can improve their mechanical properties, their biodegradability, and their osteoinductive capacity [86]. The association of β-TCP and HA has better mechanical properties than β-TCP alone, while it also enables a faster and higher bone ingrowth rate than using HA alone [87].

It was demonstrated that the extracellular calcium concentration could influence the differentiation of ASCs toward an osteogenic phenotype also without any other soluble osteogenic factor [88]. Elevated calcium induced osteogenesis and inhibited chondrogenesis in hASC even in the presence of the chondrogenic differentiation medium. This phenomenon could be an explanation for the osteoinductive and osteoconductive capacities of calcium phosphate ceramics like tricalcium phosphate (TCP) [66]. Interestingly, based on these observations, Mellor et al. developed a stacked polylactic acid (PLA) nanofibrous scaffolds containing either 0% or 20% tricalcium phosphate (TCP) nanoparticles. In chondrogenic differentiation mediums, different extracellular calcium concentrations, in different layers of the scaffold, determined ASCs’ commitment either toward osteogenesis or into chondrogenesis, thus exploiting the different calcium concentrations for site-specific differentiation.

In an in vitro model, an HA/TCP scaffold was able to enhance the osteogenic differentiation of hASCs, more than doubling the cellular alkaline phosphatase activity when added to the osteogenic differentiation medium [61].

β-TCP with ASCs was tested in several clinical settings, particularly in maxillofacial surgery and neurosurgery, with excellent results in terms of ossification [62, 89–91].

In a phase I study by Farré-Guasch et al. [62], ten patients undergoing maxillary sinus floor elevation (MSFE) for dental implant placement were divided into two groups. Each group received in a single-step procedure autologous stromal vascular fraction (SVF), containing ASCs, mixed either with β-TCP or with biphasic calcium phosphate (BCP), consisting of 60% hydroxyapatite (HA) and 40% β-tricalcium phosphate (β-TCP). A control group was treated with ceramics only. Both the study groups, compared to the control group, had an increased vascularization of the implanted area, which ultimately determined an enhanced bone formation.

cHA was tested by a Chinese group for the construction of a vascularized tissue-engineered bone together with a double-cell sheet complex [63]. A double-cell sheet (DCS) was created inducing ASCs toward vascular and osteogenic commitment at the same time. The DCS was engineered with cHA, using different patterns. The pattern organized with endothelial cell sheets covered with osteogenic cell sheets had the best results. Moreover, the DCS-cHA complexes had, in general, better bone maturation and vascularization of the graft compared to DCS or cHA alone, when implanted in nude mice and tested for ectopic ossification.

As mentioned above, incorporating minerals, like the strontium (Sr), into ceramics like HA, could enhance the osteoinductive properties of the inorganic cements. Sr ions have the ability to regulate osteoclast activity [92] and to improve the osteointegration when incorporated into bioactive scaffolds [93] or together with HA [94]. ASCs engineered in a strontium hydroxyapatite (SrHA) scaffold were used as a tissue-engineered construct (cSrHA) on a sheep model of osteoporosis [64]. ASCs demonstrated to act synergically with Sr ions, thus enhancing the osteogenic capacity of the SrHA scaffold when compared to acellular scaffold controls. ASCs adhered and proliferated on the SrHA scaffold, retaining an optimal osteogenic capacity in vitro. In the in vivo model, the osteointegration of the construct was superior to controls.

3.3. Synthetic Polymers and Hybrid Scaffolds

Synthetic polymers have been extensively investigated because of many advantages that they could offer for scaffold design, including biocompatibility, controllable biodegradability, and their physio/chemical properties. Polylactic acid (PLA), polyglycolic acid (PGA), polycaprolactone (PCL), and the copolymer poly(lactic acid-co-glycolic acid) (PLGA) are among the most frequently tested for bone tissue engineering [95]. ASCs have been combined with synthetic polymers with excellent support to osteogenic differentiation in several preclinical models [1, 96–98]. Synthetic polymers offer advantageous chemical, biological, and flexible mechanical properties. They are highly pure, readily reproducible, and easy to be tailored to fulfill specific needs. Nonetheless, synthetic polymers have several drawbacks when used alone. They have a fast degradation rate and a reduced compressive modulus, and they lack osteoinductive capacity, even though PCL has shown the ability to increase the osteogenic differentiation of various human tissue-derived mesenchymal stem cells (including ASCs) through the activation of the Wnt/β-catenin and Smad3 signaling pathways [99]. Moreover, some synthetic polymers, such as PLGA and poly-L-lactic acid (PLLA), degrade into nonbiocompatible products, often acids, which can lead to cell dysfunction or death, via perturbation of the scaffold microenvironment. An increased acidity of the tissue microenvironment, determined by high concentrations of these degradation products, could also result in adverse responses, such as inflammation or fibrous encapsulation [100, 101]. For the sake of overcoming their drawbacks, synthetic polymers have been often used over the years in combination with other materials like ceramics (e.g., HA or TCP), collagen, or natural polymers into hybrid scaffolds [75]. Hybridization with other materials allows synthetic polymers to increase their resistance to compression and their osteoinductive capacity and to prolong their degradation time. At the same time, the high versatility provided by synthetic polymers allows using these materials for scaffold creation through several bioengineering techniques like 3D bioprinting or electrospinning [37, 102]. Furthermore, synthetic polymers (e.g., PLGA) can be used for encapsulation and progressive release of bioactive molecules, exploiting the biodegradability profile of the materials [103–105].

Lee et al. [67] tested a 3D-printed PCL/TCP scaffold seeded with ASCs on a canine model of a maxillary bone defect. This scaffold enhanced the osteogenic capacity of ASCs as it was demonstrated by RT-PCR and Western blot analysis for COL1, OCN, and RUNX2. Moreover, 3D CT scans demonstrated a process of ossification of the defect after 12 weeks, confirmed by the histological analysis.

ASCs were able to undergo direct osteogenic differentiation induced by different polymer-mineral constructs in a murine model. In a study by Duan et al. [68], the different scaffolds, made of synthetic polymers mixed with different ceramics, were able to promote osteogenic differentiation of ASCs in the absence of differentiating factors. Scaffold seeded with ASCs displayed more ECM and osteoid tissue compared to those scaffolds without cells.

The addition of starch to PCL (SPCL) was used to create a wet-spun SPCL scaffold which proved to be biodegradable and biocompatible and able to harbor undifferentiated hASCs and support their proliferation and osteogenic differentiation [65]. Starch increased the resistance to tensile forces of PCL, thus improving its mechanical properties. A construct made of undifferentiated hASCs and the SPCL scaffold was tested on a murine calvarial defect model. ASCs improved the osteogenic function of SPCL and promoted significantly better bone deposition. SPCL was able to induce osteogenic differentiation in ASCs even without the addition of osteogenic factors, and the newly formed tissue was well integrated into the surrounding tissues.

3.4. Natural Polymers

Natural polymers are derived from various sources, mainly animals and plants [106]. They were among the first scaffolds to be studied in combination with hASCs to design TEPs because of their properties close to those of the ECM [107–111]. Natural polymers combined with hASCs for the use in bone tissue engineering applications are often animal derivatives. However, polysaccharides too like chitosan [112–114] or cornstarch [65, 115] have been investigated for this purpose. In between the animal-derived polymers, ASCs have demonstrated to positively interact mainly with fibrin [116], collagen [117, 118], gelatin [111, 119, 120], and silk [69, 121, 122], through the recognition of specific domains present in polymers’ structures. These polymers have a good biodegradability profile, and they can be degraded, modified, or adsorbed by the action of naturally occurring enzymes [123]. Since they are versatile, they are often used in combination with other scaffolding materials (e.g., ceramics or synthetic polymers), resulting in new constructs that incorporate their biodegradability and their biological properties, which mimic those of the ECM but have superior mechanical characteristics [124]. These composite constructs are easy to use and to adapt to multiple tissue engineering techniques like phase separation, electrospinning, or 3D printing [125–129].

When seeded on composite scaffolds synthesized with natural polymers, ASCs proved optimal adhesion, proliferation, and osteogenic differentiation, in many cases without the use of differentiating agents, both in vivo and in vitro.

The combined use of collagen and HA proved optimal osteoinductive and osteoconductive properties both in vitro and in vivo [70, 71, 130, 131].

Mazzoni et al. [71] proved that the collagen/HA is an ideal microenvironment for hASC adhesion and proliferation, and it determines an upregulation of osteogenic genes and an improvement of cellular viability and matrix mineralization, similar to that obtained under osteogenic culture conditions.

It has been demonstrated that collagen and HA scaffolds activate distinct osteogenesis signaling pathways in ASCs [130]. Collagen seemed to stimulate ECM deposition and osteoblastic differentiation through the stimulation of the extracellular signal-regulated protein kinase (ERK) pathway, whereas HA stimulated the osteogenic differentiation of ASCs via the Wnt/β-catenin pathways which determined an increase in the osteoprotegerin (OPG)/receptor activator of nuclear factor-kappa β ligand (RANKL) ratio. The upregulation of these two pathways could explain the synergistic effects of collagen and HA on the osteogenic differentiation of ASCs.

Calabrese et al. [70] tested the biocompatibility and the osteogenic capacity of hASCs on collagen-HA scaffolds in vitro. Undifferentiated ASCs were able to undergo full differentiation into mature osteoblasts even without the addition of an osteogenic medium, thus demonstrating a per se osteoinductive capacity of the scaffold, which could be exploited in order to have more straightforward translational applications in the future.

Collagen has also been used together with synthetic polymers like PGA. ASCs were seeded in combination with a construct made of collagen sponge and PGA on a rabbit critical-sized calvarial bone defect [72]. In this animal model, the scaffold itself was able to promote the healing of the defect and no difference was noted in between the scaffold-only group and the scaffold+ASC group.

Silk fibroin is a valuable alternative to other natural polymers for TEPs in combination with ASCs. It presents several advantages: in its spongeous form, it has a high mechanical and tensile strength and it has a high porosity with the possibility of different pore sizes, which eases cell attachment, proliferation, and the development of a supportive vascular network. It was demonstrated that a pore dimension of 400–600 μm determines the best bone tissue formation outcomes, as evidenced by the enhanced production of bone protein (osteopontin, collagen type I, and bone sialoprotein) and calcium deposition, and the increased total bone volume, in a porous HFIP-derived silk fibroin scaffold seeded with hASCs. In an osteogenic differentiation medium, the osteogenic performance in term of alkaline phosphatase activity (AP) at week 2 and new calcium deposition at week 7 was comparable to those of cells cultured on a decellularized trabecular bone [69].

A Korean group used electrospun silk fibroin nanofiber scaffolds, which were functionalized with two-stage HA particles. HA particles were immobilized via polydopamine-mediated adhesive chemistry. ASCs’ interactions with this construct were tested both in vitro (under standard and osteogenic culture conditions) and in vivo, on a murine critical-sized calvarial bone defect model [56]. Furthermore, they also tested hASCs transfected with the TAZ gene. TAZ is a transcriptional modulator that triggers the osteogenic differentiation of ASCs. Constructs seeded with TAZ-transfected ASCs had the best osteogenic performance both in vitro and in vivo. However, those seeded with wild-type hASCs also proved to be superior to the unseeded scaffold. This study highlighted the possible future utility of silk fibroin nanofibrous scaffolds, enriched with inorganic components and used in combination with ASCs for bone tissue engineering.

4.1. Growth Factors (GFs)

Usually, the ECM stores many of these bioactive factors, including many growth factors (GFs), such as FGF, TGFβ, BMPs, VEGF, and IGF I and II. In specific pathophysiological conditions, these GFs are released from the ECM and become available for cells [143]. When administered exogenously for therapeutic purposes, these factors have short half-lives in their natural form. Without any protection, they are readily biodegradable and their elimination through the bloodstream rapidly lowers their local concentrations. Lower concentrations reduce their efficacy into the target organs, while systemic diffusion increases the risk of adverse effects [38].

Therefore, more adequate delivery strategies should be investigated and employed in order to have stable and efficacious steady-state levels and a prolonged release over time, which mimics what actually happens under physiological conditions. Embedding bioactive factors and exosomes into scaffolds, microsphere encapsulation, and enhanced expression through gene transfection into mesenchymal cells are among the most investigated options [39, 128, 140, 144–148].

As mentioned above, efficacious strategies in bone tissue engineering rely both on an optimal ossification of the constructs and on its adequate vascularization, which allows integration and avoids total or partial necrosis of the graft. For these purposes, GFs have been extensively studied, and among them PDGF-BB, the TGF-β family (that includes BMP proteins), FGFs, insulin-like growth factors, and VEGF. In particular, VEGF and BMP2 were considered as the principal actors in the bone repairing process, respectively, on the vascular and osteogenic side [149]. It has been demonstrated that VEGF and BMP2 act synergistically in favor of bone formation and their coadministration is more efficacious than BMP-2 alone [150]. Three BMPs have already been approved in clinics: BMP-2 (Infuse bone graft) since 2003, BMP-7 (OP-1 putty) (from 2003 to 2014 when it was withdrawn), and rhPGDF-BB (Augment® bone graft), since 2015 [9]. BMP-2 has already been used in many clinical situations together with ASCs. In several case series, a construct made of hASCs, with BMP2, onto a β-TCP scaffold, proved efficacious for the reconstruction of large maxillary or mandibular defects and those of craniomaxillofacial hard tissues in general [91, 151, 152]. Parallelly, resorbable scaffolds seeded with hASCs combined with BMP2 were used to reconstruct large craniofacial bony defects in 20 patients [90].

Many GFs useful in bone regeneration, such as b-FGF or FGF-2, IGF-1, PDGF-BB, and VEGF, are contained in significative quantities into the platelet-rich plasma (PRP) [153]. PRP can be used to induce the osteogenic differentiation of ASCs, both in vitro and in vivo [132, 154]. Several authors incorporated PRP into different types of scaffold in order to have a controlled and prolonged release of GFs and to favor ASC-mediated bone formation [155–158]. These systems allowed an increased osteogenic capacity of ASCs and an enhanced bone deposition, both in vitro and in animal models.

However, ASCs are not only the target of GFs, but they are also able to produce and secrete them in both an autocrine and paracrine way. They release microvesicles (MVs) containing angiogenic factors like FGF2, PDGF, VEGF, MMP2, and MMP9 and osteogenic molecules, such as BMP2 [159, 160]. Furthermore, ASCs can be engineered to express and release osteogenic factors like BMP-2. Using this method, Lin et al. were able to significantly increase calvarial healing through the BMP2-expressing ASCs/gelatin constructs and highlighted the importance of combinations of growth factors and scaffold in healing pathways and their efficacy together [161].

4.2. Exosomes and miRNAs

Exosomes are extracellular vesicles with a spheroidal/discoid shape which have a diameter in between 30 and 150 nm. They play a pivotal role in intercellular communication since they show the ability to transport specific molecules like proteins, lipids, DNAs, and RNAs from cell to cell [162, 163]. The precise mechanisms through which exosomes determine the osteogenic differentiation of ASCs is still under debate. It has been discovered that exosomes could regulate the functions of target cells through epigenetic changes, thus determining the promotion of bone tissue repair and also their fate through the induction of proliferation or apoptosis. In these processes, mainly proteins and RNAs are involved with significant roles [164–166].

Exosomes derived from MSCs in general, and in particular those from ASCs, have been investigated in the last years as a possible strategy for osteogenic differentiation, to employ as an alternative to osteogenic differentiation mediums, GFs, and genetic modification [140, 167, 168].

Li et al. [140] tested the efficacy of exosomes derived from osteogenically committed ASCs in promoting the osteogenic differentiation of bone marrow MSCs (bmMSCs) and bone tissue formation. In order to mimic a physiological release, the exosomes were bound to a PLGA/PDA matrix, which allowed a slow and controlled release regulated by its biodegradability properties. In about 48 hours, bmMSCs almost completely internalized the exosomes that stimulated cell proliferation, migration, and osteogenic differentiation, in vitro. Moreover, the cell-free constructs made of PLGA/PDA+exosomes, implanted on a murine critical-sized calvarial bone defect, actively promoted stem cell migration, homing, and new bone formation, in a better way than the PLGA/PDA control scaffold.

In a study by Lu et al. [169], the efficacy of ASCs’ exosomes was also confirmed on human primary osteoblastic cells (HOBs), stimulating proliferation, differentiation, and bone-forming capacity. They also demonstrated that preconditioning the ASCs with tumor necrosis factor-alpha (TNF-α), for three days, further increased the capacity of ASCs’ exosomes to induce osteogenic differentiation. They supposed that the priming with TNF-α mimics the acute inflammatory phase following a bone injury. They demonstrated that exosomes, from TNF-α-preconditioned ASCs, stimulated the osteogenic gene expression through the Wnt signaling pathway, which is a fundamental pathway in osteogenic differentiation [170, 171].

Yang et al. [172] characterized the exosomes from both osteogenically differentiated and undifferentiated ASCs. In the absence of osteogenic factors, exosomes from osteogenically differentiated cells were able to promote osteogenic differentiation in undifferentiated ASCs, whereas exosomes from undifferentiated ASCs were not. Moreover, ASC-derived exosomes were internalized by target ASCs faster than by other cell types, like bone marrow MSCs (6 h vs. 48 h). According to the authors, this element could be in favor of the combined use in bone tissue engineering of ASCs with ASC-derived exosomes, which limits the loss of exosome, due to a more prolonged uptake, and ultimately leads to a more efficient promotion of bone regeneration. To explain the differences between differentiated and undifferentiated ASCs, they have furthermore analyzed the miRNAs’ expression profiles of both cell types. Two hundred thirty-four genes were differently regulated comparing osteogenic ASCs’ exosomes to those of undifferentiated ASCs (201 upregulated and 33 downregulated). Most of these miRNAs were related to signaling pathways involved in the osteogenetic process, like the MAPK, the Wnt, and the TGF-β signaling pathway. For example, the level of miR-130a-3p was significantly higher in the exosomes from osteogenic ASCs. This miRNA targets and blocks SIRT7, an antagonist on the Wnt pathway, which results ultimately upregulated [173, 174]. The mir-130a-3p/SIRT7/Wnt axis could be a molecular mechanism behind exosomes’ efficacy in the regulation of ASC osteogenic differentiation.

As aforementioned, miRNAs play an essential role in the regulation of several biological processes, including osteogenesis, both positively and negatively.

Apart from those contained in ASCs’ exosomes, miRNAs can be added into tissue-engineered constructs via different methods in order to improve the osteogenic efficacy of ASCs. miRNAs can be included in the structure of the scaffold which regulates their release, or they can be transfected through viral vectors into ASCs. Viral transfection carries with it, of course, some safety issues, which should be further evaluated, concerning the future translation into clinical practice [146]. An increased expression of miRNAs like miR-148b, miR-26a, miR-135, or miR-130a-3p could enhance the osteogenic processes and increment bone formation [175–179].

Rat ASCs transfected with a lentivirus expressing miR-26a and seeded on an HA scaffold showed an upregulation of proosteogenic genes and an increased bone-forming capacity. This construct, transplanted in a rat tibial defect model, was able to fully close the gap in 12 weeks [180]. mir-148b proved excellent osteogenic capacity and showed a synergistic action together with BMP-2. It was tested on hASCs in multiple in vitro and in vivo models [177–179]. Two studies by Li et al. and Liao et al. transfected undifferentiated hASCS with baculoviruses coexpressing miR148 and BMP-2. mir-148b and BMP-2 were prolongedly overexpressed, and osteogenic differentiation of ASCs was increased in both studies. Similarly, transfected hASCs seeded onto a PLGA scaffold were able to close a murine calvarial bone defect in 12 weeks.

Qureshi et al. [178] combined a truncated miR-148b mimic with photoactivated silver nanoparticles. Undifferentiated hASCs were transfected with the photoactivated miRNA148b-silver nanoparticle conjugates and seeded onto PCL scaffolds. This miRNA delivery system allows to potentially control the differentiation in vivo since miRNA conjugates remain inert until photoexposed at the appropriate dosage and wavelength. At 12 weeks, constructs made of transfected hASCs+PCL scaffold showed a statistically significant better closure of a mouse calvarial bone defect when compared to the control groups.

Conversely, other miRNAs such as miR146a, miR-17, miR-23a, and miR-31 downregulate the BMP2-induced osteogenesis, suppressing BMP-2 and several downstream factors like SMAD1/4, Runx2, and Osx. TGFβ1 upregulates the expression of these miRNAs. Therefore, antagonists of these miRNA could ultimately determine an improved bone tissue deposition [133, 175, 181]. A lentivirus expressing an antisense miR31 was transfected into rat ASCs that were tested by Deng et al. [181] on a rat critical-sized defect together with a β-TCP scaffold. The knockout of miR-31 increased the bone volume and the bone mineral density and decreased the scaffold residue in vivo, thus dramatically improving the repair of critical-sized defects at eight weeks.

Similarly, rat ASCs modified in order to express an anti-miR146 were tested both in vitro and in vivo. The inhibition of miR-146 greatly enhanced ADSC-mediated bone regeneration and bone deposition in the animal model [175].

A synthetic overview of the use of bioactive factors for ASC differentiation is provided in Table 2.