Volume 19, Issue 21 2370148
Cover Picture
Free Access

Ultrathin Ultralow-Platinum Catalyst Coated Membrane for Proton Exchange Membrane Fuel Cells (Small 21/2023)

Jiaqi Qin

Jiaqi Qin

State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, 2 Linggong Road, Dalian, 116024 P. R. China

Search for more papers by this author
Huiyuan Liu

Huiyuan Liu

Institute for Energy Research, Jiangsu University, 301 Xuefu Road, Zhenjiang, 212013 P. R. China

Search for more papers by this author
Guangqi Han

Guangqi Han

State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, 2 Linggong Road, Dalian, 116024 P. R. China

Search for more papers by this author
Yang Lv

Yang Lv

State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, 2 Linggong Road, Dalian, 116024 P. R. China

Search for more papers by this author
Xiandong Wang

Xiandong Wang

State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, 2 Linggong Road, Dalian, 116024 P. R. China

Search for more papers by this author
Guanghui Zhang

Guanghui Zhang

State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, 2 Linggong Road, Dalian, 116024 P. R. China

Search for more papers by this author
Yujiang Song

Yujiang Song

State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, 2 Linggong Road, Dalian, 116024 P. R. China

Search for more papers by this author
First published: 24 May 2023

Graphical Abstract

Proton Exchange Membrane Fuel Cells

In article number 2207155, Huiyuan Liu, Yujiang Song, and co-workers construct ultrathin ultralow-Pt integrated catalyst coated membrane by proton-initiated regioselective nucleation and growth of Pt/Pd catalyst layer on membrane. The highly active ultrathin catalyst layer greatly facilitates mass transfer and enhances the peak mass specific power density up to 59.9 W mgPt, Cathode−1 for proton exchange membrane fuel cell. [Correction added on 10th of August, after first online publication: the front cover image was updated.]

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.