Organic tandem solar cells under indoor light illumination
Swarup Biswas
School of Electrical and Computer Engineering, Institute of Information Technology, University of Seoul, 163 Seoulsiripdaero, Dongdaemun-gu, Seoul, 02504 Republic of Korea
Search for more papers by this authorYoung-Jun You
Division of Electronics and Electrical Engineering, Dongguk University, Seoul, 04620 Republic of Korea
Search for more papers by this authorPremkumar Vincent
School of Electronics Engineering, Kyungpook National University, 80 Daehakro, Bukgu, Daegu, 41566 Republic of Korea
Search for more papers by this authorCorresponding Author
Jin-Hyuk Bae
School of Electronics Engineering, Kyungpook National University, 80 Daehakro, Bukgu, Daegu, 41566 Republic of Korea
Correspondence
J. H. Bae, School of Electronics Engineering, Kyungpook National University, 80 Daehakro, Bukgu, Daegu, Republic of Korea.
Email: [email protected]
J. W. Shim, School of Electrical Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea.
Email: [email protected]
H. Kim, School of Electrical and Computer Engineering, Institute of Information Technology, University of Seoul, 163 Seoulsiripdaero, Dongdaemun-gu, Seoul 02504, Republic of Korea.
Email: [email protected]
Search for more papers by this authorCorresponding Author
Jae Won Shim
School of Electrical Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul, 02841 Republic of Korea
Correspondence
J. H. Bae, School of Electronics Engineering, Kyungpook National University, 80 Daehakro, Bukgu, Daegu, Republic of Korea.
Email: [email protected]
J. W. Shim, School of Electrical Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea.
Email: [email protected]
H. Kim, School of Electrical and Computer Engineering, Institute of Information Technology, University of Seoul, 163 Seoulsiripdaero, Dongdaemun-gu, Seoul 02504, Republic of Korea.
Email: [email protected]
Search for more papers by this authorCorresponding Author
Hyeok Kim
School of Electrical and Computer Engineering, Institute of Information Technology, University of Seoul, 163 Seoulsiripdaero, Dongdaemun-gu, Seoul, 02504 Republic of Korea
Correspondence
J. H. Bae, School of Electronics Engineering, Kyungpook National University, 80 Daehakro, Bukgu, Daegu, Republic of Korea.
Email: [email protected]
J. W. Shim, School of Electrical Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea.
Email: [email protected]
H. Kim, School of Electrical and Computer Engineering, Institute of Information Technology, University of Seoul, 163 Seoulsiripdaero, Dongdaemun-gu, Seoul 02504, Republic of Korea.
Email: [email protected]
Search for more papers by this authorSwarup Biswas
School of Electrical and Computer Engineering, Institute of Information Technology, University of Seoul, 163 Seoulsiripdaero, Dongdaemun-gu, Seoul, 02504 Republic of Korea
Search for more papers by this authorYoung-Jun You
Division of Electronics and Electrical Engineering, Dongguk University, Seoul, 04620 Republic of Korea
Search for more papers by this authorPremkumar Vincent
School of Electronics Engineering, Kyungpook National University, 80 Daehakro, Bukgu, Daegu, 41566 Republic of Korea
Search for more papers by this authorCorresponding Author
Jin-Hyuk Bae
School of Electronics Engineering, Kyungpook National University, 80 Daehakro, Bukgu, Daegu, 41566 Republic of Korea
Correspondence
J. H. Bae, School of Electronics Engineering, Kyungpook National University, 80 Daehakro, Bukgu, Daegu, Republic of Korea.
Email: [email protected]
J. W. Shim, School of Electrical Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea.
Email: [email protected]
H. Kim, School of Electrical and Computer Engineering, Institute of Information Technology, University of Seoul, 163 Seoulsiripdaero, Dongdaemun-gu, Seoul 02504, Republic of Korea.
Email: [email protected]
Search for more papers by this authorCorresponding Author
Jae Won Shim
School of Electrical Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul, 02841 Republic of Korea
Correspondence
J. H. Bae, School of Electronics Engineering, Kyungpook National University, 80 Daehakro, Bukgu, Daegu, Republic of Korea.
Email: [email protected]
J. W. Shim, School of Electrical Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea.
Email: [email protected]
H. Kim, School of Electrical and Computer Engineering, Institute of Information Technology, University of Seoul, 163 Seoulsiripdaero, Dongdaemun-gu, Seoul 02504, Republic of Korea.
Email: [email protected]
Search for more papers by this authorCorresponding Author
Hyeok Kim
School of Electrical and Computer Engineering, Institute of Information Technology, University of Seoul, 163 Seoulsiripdaero, Dongdaemun-gu, Seoul, 02504 Republic of Korea
Correspondence
J. H. Bae, School of Electronics Engineering, Kyungpook National University, 80 Daehakro, Bukgu, Daegu, Republic of Korea.
Email: [email protected]
J. W. Shim, School of Electrical Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea.
Email: [email protected]
H. Kim, School of Electrical and Computer Engineering, Institute of Information Technology, University of Seoul, 163 Seoulsiripdaero, Dongdaemun-gu, Seoul 02504, Republic of Korea.
Email: [email protected]
Search for more papers by this authorSwarup Biswas, Young-Jun You, and Premkumar Vincent contributed equally to this work.
Abstract
The lifetime of a device depends highly on that of its battery. In order to enhance the longevity of microsystems or sensor networks, it is necessary for these devices to be self-powered. Indoor photovoltaics allow the possibility of harvesting artificial light sources for powering microsystems. Whereas indoor photovoltaics based on single active layers have showed high efficiencies under LED lighting, tandem structures have yet to be tested extensively. In our study, we use finite-difference time-domain simulations to study the highest possible short-circuit current density that can be extracted from tandem organic devices. We compare the simulation results to the results for photovoltaic devices based on single bulk active layer heterojunctions. Our simulations found that although detailed balanced band gap calculations show tandem photovoltaics to be viable, the low-intensity emission spectra of white LED light sources can be better harvested by single active layer-based photovoltaics. The current-matching limitation of a tandem photovoltaic structure connected in series limits the highest output current and open-circuit voltage of the device and, thus, its performance for the illumination of lower intensity light.
Supporting Information
Filename | Description |
---|---|
pip3301-sup-0001-Supplementary_information.docxWord document, 193 KB |
FIGURE S1: (a) The electric field intensity (|E|2) distribution inside the tandem device structure. FIGURE S2: The imaginary part of permittivity of each layer of the tandem device is plotted. |
Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.
REFERENCES
- 1Shockley W, Queisser HJ. Detailed balance limit of efficiency of p-n junction solar cells. J Appl Phys. 1961; 32(3): 510-519.
- 2Rühle S. Tabulated values of the Shockley–Queisser limit for single junction solar cells. Sol Energy. 2016; 130: 139-147.
- 3Jackson P, Hariskos D, Lotter E, et al. New world record efficiency for Cu(In,Ga)Se2 thin-film solar cells beyond 20%. Prog Photovoltaics Res Appl. 2011; 19(7): 894-897.
- 4Masuko K, Shigematsu M, Hashiguchi T, et al. Achievement of more than 25% conversion efficiency with crystalline silicon heterojunction solar cell. IEEE J Photovoltaics. 2014; 4(6): 1433-1435.
- 5Alharbi FH, Kais S. Theoretical limits of photovoltaics efficiency and possible improvements by intuitive approaches learned from photosynthesis and quantum coherence. Renew Sustain Energy Rev. 2015; 43: 1073-1089.
- 6Green MA, Hishikawa Y, Dunlop ED, Levi DH, Hohl-Ebinger J, Ho-Baillie AWY. Solar cell efficiency tables (version 52). Prog Photovoltaics Res Appl. 2018; 26(7): 427-436.
- 7He Z, Zhong C, Su S, Xu M, Wu H, Cao Y. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure. Nat Photonics. 2012; 6(9): 591-595.
- 8Scharber MC, Mühlbacher D, Koppe M, et al. Design rules for donors in bulk-heterojunction solar cells—towards 10% energy-conversion efficiency. Adv Materials. 2006; 18(6): 789-794.
- 9Yuan J, Ford MJ, Xu Y, Zhang Y, Bazan GC, Ma W. Improved tandem all-polymer solar cells performance by using spectrally matched subcells. Adv Energy Mater. 2018; 8(14):1703291.
- 10Meng L, Zhang Y, Wan X, et al. Organic and solution-processed tandem solar cells with 17.3% efficiency. Science. 2018; 361: 1094-1098.
- 11Ameri T, Li N, Brabec CJ. Highly efficient organic tandem solar cells: a follow up review. Energ Environ Sci. 2013; 6(8): 2390-2413.
- 12Roundy S, Steingart D, Frechette L, Wright P, Rabaey J. Power sources for wireless sensor networks. European Workshop on Wireless Sensor Networks, Springer. 2004; 1-17.
- 13Warneke BA, Scott MD, Leibowitz BS, et al. An autonomous 16 mm/sup 3/solar-powered node for distributed wireless sensor networks. Sensors, 2002 IEEE. 2002; 1510-1515.
10.1109/ICSENS.2002.1037346 Google Scholar
- 14Hande A, Polk T, Walker W, Bhatia D. Indoor solar energy harvesting for sensor network router nodes. Microprocess Microsys. 2007; 31(6): 420-432.
- 15Tan YK, Panda SK. Energy harvesting from hybrid indoor ambient light and thermal energy sources for enhanced performance of wireless sensor nodes. IEEE Trans Ind Electron. 2011; 58(9): 4424-4435.
- 16Águas H, Mateus T, Vicente A, et al. Thin film silicon photovoltaic cells on paper for flexible indoor applications. Adv Funct Mater. 2015; 25(23): 3592-3598.
- 17Shin SC, Koh CW, Vincent P, et al. Ultra-thick semi-crystalline photoactive donor polymer for efficient indoor organic photovoltaics. Nano Energy. 2019; 58: 466-475.
- 18Mathews I, King PJ, Stafford F, Frizzell R. Performance of III–V solar cells as indoor light energy harvesters. IEEE J Photovolt. 2016; 6(1): 230-235.
- 19Tingare YS, Vinh NSN, Chou HH, et al. New acetylene-bridged 9, 10-conjugated anthracene sensitizers: application in outdoor and indoor dye-sensitized solar cells. Advanced Energy Materials. 2017; 7:1700032.
- 20Deline C, Stokes A, Silverman T J, Rummel S, Jordan D, Kurtz S. Electrical bias as an alternate method for reproducible measurement of copper indium gallium diselenide (CIGS) photovoltaic modules. Reliability of Photovoltaic Cells, Modules, Components, and Systems V, International Society for Optics and Photonics. 2012:84720G. https://www.spiedigitallibrary.org/conference-proceedings-of-spie/8472/84720G/Electrical-bias-as-an-alternate-method-for-reproducible-measurement-of/10.1117/12.929899.short
- 21Lucarelli G, Di Giacomo F, Zardetto V, Creatore M, Brown TM. Efficient light harvesting from flexible perovskite solar cells under indoor white light-emitting diode illumination. Nano Res. 2017; 10(6): 2130-2145.
- 22Minnaert B, Veelaert P. A proposal for typical artificial light sources for the characterization of indoor photovoltaic applications. Energies. 2014; 7(3): 1500-1516.
- 23Minnaert B, Veelaert P. The potential of tandem photovoltaic solar cells for indoor applications. 1st International e-Conference on Energies, Sciforum Electronic Conference Series. 2014.
- 24De Vos A. Detailed balance limit of the efficiency of tandem solar cells. Journal of Physics D. 1980; 13(5): 839-846.
10.1088/0022-3727/13/5/018 Google Scholar
- 25Vincent P, Shin SC, Goo JS, et al. Indoor-type photovoltaics with organic solar cells through optimal design. Dyes and Pigments. 2018; 159: 306-313.
- 26Duche D, Torchio P, Escoubas L, et al. Improving light absorption in organic solar cells by plasmonic contribution. Sol Energy Mater sol Cells. 2009; 93(8): 1377-1382.
- 27Zhu J, Zeng B, Kim R S, Wu Z. Light concentration in polymer bulk heterojunction solar cells with plasmonic nanoparticles. Photonics and Optoelectronics Meetings (POEM) 2011: Optoelectronic devices and integration, International Society for Optics and Photonics 2012:83331C. https://www.spiedigitallibrary.org/conference-proceedings-of-spie/8333/83331C/Light-concentration-in-polymer-bulk-heterojunction-solar-cells-with-plasmonic/10.1117/12.914545.short?SSO=1
- 28Chen CC, Chang WH, Yoshimura K, et al. An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%. Adv Mater. 2014; 26(32): 5670-5677.