Addition of phosphates and chlorhexidine to resin-modified MTA materials

To evaluate the properties of experimental mineral trioxide aggregate (MTA) resin-modified materials for root-end filling procedures, varying their compositions regarding the addition of hydroxiapatite (HA) or dicalcium phosphate dihydrate, with or without chlorhexidine digluconate. White MTA (Angelus, Londrina, Brazil) was used as a reference material. Degree of conversion (DC) was evaluated by Fourier transformed infrared (FTIr) spectroscopy (n = 5). Flowability (n = 3) and radiopacity (n = 3) were evaluated following ISO 6876:2001 methods. For splitting tensile strength analysis, cylindrical samples (n = 10) were subjected to compressive load using a universal testing machine (Instron Corporation, Norwood, MA). Water sorption and solubility tests were performed according to ISO 4049:2009 methods. Calcium ion release and pH analysis (n = 10) were evaluated using a pH meter (Orion, Watsonville, CA). Cytotoxicity (n = 8) of materials extracts was evaluated as cell viability percentage. Statistical analysis was performed using Kolmogorov–Smirnov for normal distribution and data was subjected to one-way ANOVA and Tukey test (α = 0.05). Addition of chlorhexidine digluconate reduced DC mean values for experimental materials (<50%). White MTA demonstrated lower flowability (5.3 mm) and higher radiopacity (9.8 mm Al), splitting tensile strength (9.1 MPa), solubility (8.2 μg/mm³), calcium ion release (~26.5 ppm), cytotoxicity (55.2%), and pH mean values (10.8), when compared to experimental materials. All groups demonstrated a decrease in calcium release (<85%) and pH (<13%). Formulation containing HA demonstrated similar pH values after 28 days when compared to white MTA. Evaluated experimental resin-modified MTA based materials without chlorhexidine digluconate showed satisfactory results for all physico-chemical properties tested and cytotoxicity. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 2195–2201, 2019.