Volume 10, Issue 4 pp. 423-440
Review

Control Strategies for Enhanced Biogas Production from Chicken Manure

Dr. Ahmer Ali Siyal

Dr. Ahmer Ali Siyal

Universiti Teknologi PETRONAS, HICoE Centre for Biofuel and Biochemical Research (CBBR), Department of Chemical Engineering, 32610 Seri Iskandar, Perak, Malaysia

Search for more papers by this author
Dr. Rashid Shamsuddin

Corresponding Author

Dr. Rashid Shamsuddin

Universiti Teknologi PETRONAS, HICoE Centre for Biofuel and Biochemical Research (CBBR), Department of Chemical Engineering, 32610 Seri Iskandar, Perak, Malaysia

Correspondence: Dr. Rashid Shamsuddin ([email protected]), HICoE Centre for Biofuel and Biochemical Research (CBBR), Department of Chemical Engineering, Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak, Malaysia.Search for more papers by this author
Prof. Masaharu Komiyama

Prof. Masaharu Komiyama

Universiti Teknologi PETRONAS, HICoE Centre for Biofuel and Biochemical Research (CBBR), Department of Chemical Engineering, 32610 Seri Iskandar, Perak, Malaysia

Search for more papers by this author
M. Devendran Manogaran

M. Devendran Manogaran

Universiti Teknologi PETRONAS, HICoE Centre for Biofuel and Biochemical Research (CBBR), Department of Chemical Engineering, 32610 Seri Iskandar, Perak, Malaysia

Search for more papers by this author
Dr. Totok Soehartanto

Dr. Totok Soehartanto

Institut Teknologi Sepuluh Nopember Surabaya, Jurusan Teknik Fisika, FTI, J. Arief Rahman Hakim, 60111 Surabaya, Indonesia

Search for more papers by this author
First published: 06 June 2023
Citations: 2

Abstract

The control strategies adopted in formulation and anaerobic digestion (AD) process of chicken manure (CM) for the control and enhancement of biogas production are reviewed. The existing limitations and future challenges in the production of biogas from AD of CM are briefly discussed. The control strategy adopted for formulation is pretreatment of CM (physical, chemical, biological, and thermal) while strategies for AD include selection of optimal parameters (pH, C/N ratio, organic loading rate (OLR), and temperature), co-AD with other substrates, and addition of supporting materials. The pretreatment of CM, selection of optimal parameters, Co-AD of CM with other substrates, and addition of supporting materials overall enhance biogas and methane production due to increase of hydrolysis and C/N and decrease of ammonia inhibition, CO2 and H2S contents. The implementation of developed control strategies in continuous plants, development of new strategies, and use of supporting materials in combinations of two or three for better performance are the future challenges in the AD of CM. The control strategies had a significant impact on the efficient use of CM and improved biogas and methane production.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.