Optimization of process parameters for the preparation of continuous glass fiber-reinforced Nylon 6 composites by vacuum bagging process
Funding information: Fundamental Research Funds for the Central Universities, Grant/Award Number: ZY2204
Abstract
Vacuum bagging (VB) technology has become an important method for low-cost preparation of advanced composites materials. In this work, continuous glass fiber-reinforced polyamide-6 (GF/PA-6) composites were successfully manufactured bt VB process, utilizing the anionic polymerization of caprolactam (a monomer of PA-6). The effects of vacuum pressure, curing temperature, curing time on the monomer conversion, crystallinity, and mechanical properties of the composites were investigated by the self-made experimental platform. The results indicated that the number of fiber layers affected the properties of products by affecting the thickness of composites. Vacuum pressure mainly affected the impregnation process of resin on fiber, and the product performance was the best at 1 bar. The flexural strength and flexural modulus of the composites reached the highest when the curing temperature was 150°C and the curing time was 90 min, which were 273.92 MPa and 14.04 GPa respectively, while the interlaminar shear strength (ILSS) was highest at 170°C, up to 42.73 MPa.
CONFLICT OF INTEREST
The authors report no conflicts of interest. The authors are responsible for the content and writing of this article. There are no prior oral presentation and original source of the material.
Open Research
DATA AVAILABILITY STATEMENT
The data that support the findings of this study are available from the corresponding author upon reasonable request.
