• Issue

    Journal of Prosthodontics: Volume 30, Issue 3

    189-281
    March 2021
Previous Issue|Next Issue
Export Citation(s)Download PDF(s)

Issue Information

Free Access

Issue Information - Editorial Board

  • Pages: 189-190
  • First Published: 08 March 2021

Original Articles

Fabrication of a Mandibular Advancement Device Using a Fully Digital Workflow: A Clinical Report

Bulent Piskin DDS, PhD,  Alper Uyar DDS, PhD,  Mine Yuceer DDS,  Sila Caglayan Topal DDS, PhD,  Rahsan Atasoy Senturk DDS, PhD,  Serdar Sutcu DDS, PhD,  Omer Karakoc MD, 
  • Pages: 191-195
  • First Published: 20 November 2020

Digital Immediate Complete Denture for a Patient with Rhabdomyosarcoma: A Clinical Report

Gustavo Mendonça DDS, MSc, PhD,  Sean P. Edwards MD, DDS,  Colin A. Mayers DDS, MS,  Priscila Ceolin Meneghetti DDS, MSc,  Fei Liu DDS, PhD, FACP, 
  • Pages: 196-201
  • First Published: 15 December 2020

An Educational Experiment Resulting from COVID-19: The Use of At-Home Waxing and Webinars for Teaching a 3-Week Intensive Course in Tooth Morphology to First Year Dental Students

Charles J. Goodacre DDS, MSD,  Reema Younan DDS,  Vaughn Kearbey,  Michael Fitzpatrick, 
  • Pages: 202-209
  • First Published: 23 November 2020

Review

Microbiological Profile and Human Immune Response Associated with Peri-Implantitis: A Systematic Review

Anmar Kensara BDS, MS,  Eman Hefni BDS, MS,  Mary Ann Williams MSLS,  Hanae Saito DDS, MS, CRC,  Emmanuel Mongodin PhD,  Radi Masri DDS, MS, PhD, FACP, 
  • Pages: 210-234
  • First Published: 05 October 2020

Original Articles

Effects of Denture Cleansers on the Flexural Strength of PMMA Denture Base Resin Modified with ZrO2 Nanoparticles

Mohammed M. Gad BDS, MSc,  Reem Abualsaud BDS, DScD,  Shaimaa M. Fouda BDS, MSc,  Ahmed Rahoma BDS, MSc, PhD,  Ahmad M. Al-Thobity BDS, MDS, FRCD(C),  Soban Q. Khan BSc, MSc,  Sultan Akhtar MSc, PhD,  Fahad A. Al-Harbi BDS, MSD, DScD, FACP, 
  • Pages: 235-244
  • First Published: 11 August 2020

Surface Roughness of Milled Lithium Disilicate With and Without Reinforcement After Finishing and Polishing: An In Vitro Study

Brian A. Brodine DDS,  Tom V. Korioth DDS, PhD,  Brian Morrow MS,  Mohamed A. Shafter DDS, DScD,  Wainscott C. Hollis DDS, MDS,  David R. Cagna DMD, MS, 
  • Pages: 245-251
  • First Published: 31 August 2020

Effect of Anti-Rotational Abutment Features and Novel Computerized Fabrication Techniques on the Marginal Fit of Implant-Supported Metal Copings

Guliz Aktas DDS, PhD,  Mustafa Baris Guncu DDS, PhD,  Elif Tuba Akcin DDS,  Umut Cakan DDS, PhD,  Senay Canay DDS, PhD, 
  • Pages: 252-256
  • First Published: 16 September 2020

Evaluation of Denture Base Adaptation Fabricated Using Conventional, Subtractive, and Additive Technologies: A Volumetric Micro-Computed Tomography Analysis

Ece İrem Oğuz DDS,  Mehmet Ali Kılıçarslan DDS, PhD,  Mutlu Özcan DDS, DMD, PhD,  Mert Ocak PhD,  Burak Bilecenoğlu DDS, PhD,  Kaan Orhan DDS, PhD, 
  • Pages: 257-263
  • First Published: 07 January 2021

Laboratory Trends for Removable Prosthodontics: A Comparison of Two Surveys

Alexandra B. Yarborough DDS,  Wendy Auclair Clark DDS, MS,  Daniel A. Givan DMD, PhD,  Ingeborg J. De Kok DDS, MS, 
  • Pages: 264-270
  • First Published: 12 November 2020

Technique to Maintain the Correct Spatial Orientation of the Maxillary Diagnostic Cast to that of the Master Cast in a Full-Mouth Rehabilitation Case

WookJin Seong DDS, MS, PhD,  Mariano A. Polack DDS, MS,  Luis F. Delima DDS,  James Lee BDS (Hons), 
  • Pages: 271-275
  • First Published: 07 December 2020

Comparison of Intaglio Surface Adjustment in the Oral Cavity for Lithium Disilicate Crowns Fabricated Using Different Scanners

Keunbada Son MS,  Beom-Young Yu MS,  Jeong-Hyeon Lee DDS,  Young-Tak Son BS,  Kyu-Bok Lee DDS, PhD, 
  • Pages: 276-281
  • First Published: 13 September 2020