Chapter 14
Biobased and Biodegradable PHBV-Based Polymer Blends and Biocomposites: Properties and Applications
Alireza Javadi,
Srikanth Pilla,
Shaoqin Gong,
Lih-Sheng Turng,
Alireza Javadi
Department of Biomedical Engineering, University of Wisconsin—Madison, WI, USA
Wisconsin Institute for Discovery, University of Wisconsin–Madison, WI, USA
Search for more papers by this authorSrikanth Pilla
Wisconsin Institute for Discovery, University of Wisconsin–Madison, WI, USA
Search for more papers by this authorShaoqin Gong
Department of Biomedical Engineering, University of Wisconsin—Madison, WI, USA
Wisconsin Institute for Discovery, University of Wisconsin–Madison, WI, USA
Search for more papers by this authorLih-Sheng Turng
Department of Biomedical Engineering, University of Wisconsin—Madison, WI, USA
Wisconsin Institute for Discovery, University of Wisconsin–Madison, WI, USA
Search for more papers by this authorAlireza Javadi,
Srikanth Pilla,
Shaoqin Gong,
Lih-Sheng Turng,
Alireza Javadi
Department of Biomedical Engineering, University of Wisconsin—Madison, WI, USA
Wisconsin Institute for Discovery, University of Wisconsin–Madison, WI, USA
Search for more papers by this authorSrikanth Pilla
Wisconsin Institute for Discovery, University of Wisconsin–Madison, WI, USA
Search for more papers by this authorShaoqin Gong
Department of Biomedical Engineering, University of Wisconsin—Madison, WI, USA
Wisconsin Institute for Discovery, University of Wisconsin–Madison, WI, USA
Search for more papers by this authorLih-Sheng Turng
Department of Biomedical Engineering, University of Wisconsin—Madison, WI, USA
Wisconsin Institute for Discovery, University of Wisconsin–Madison, WI, USA
Search for more papers by this authorBook Editor(s):Srikanth Pilla,
Srikanth Pilla
Wisconsin Institute for Discovery, University of Wisconsin-Madison, WI, USA
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Synthesis of PHBV
-
Microcellular Injection Molding
-
Thermal Properties
-
Thermal Degradation Properties
-
Mechanical Properties
-
Viscoelastic Properties
-
Biocompatibility
-
Biodegradability
-
Applications
-
Conclusion
-
Acknowledgements
References
- K.G. Satyanarayana, G.G.C. Arizaga, F. Wypych, Progress in Polymer Science, Vol. 34, p. 982, 2009.
- C. Scholz, “ Poly(β-hydroxyalkanoates) as Potential Biomedical Materials: An Overview”, in: C. Scholz, R.A. Gross, eds., Polymers From Renewable Resources Washington: American Chemical Society. 328–334, 2000.
- S. Philip, T. Keshavarz, I. Roy, Journal of Chemical Technology and Biotechnology, Vol. 82, p. 233, 2007.
- L. Jiang, E. Morelius, J. Zhang, M. Wolcott, J. Holbery, Journal of Composite Materials, Vol. 42, p. 2629, 2008.
- G. J. M. Koning, P. J. Lemstra, Polymer, Vol. 34, p. 4089, 1993.
- R.A. Shanks, A. Hodzic, S. Wong, Journal of Applied Polymer Science, Vol. 91, p. 2114, 2004.
- L. Yu, K. Dean, L. Lin, Progress in Polymer Science, Vol. 3, p. 576, 2006.
- A. K. Mohanty, M. Misra, G. Hinrichsen, Macromolecular Materials and Engineering, Vol. 276, p. 1, 2000.
- S. F. Wang, C. J. Song, G. X. Chen, T.Y. Guo, J. Liu, B.H. Zhang, S. Takeuchi, Polymer Degradation and Stability, Vol. 87, p. 69, 2005.
- Z. Qiu, W. Yang, T. Ikehara, T. Nishi, Polymer, Vol. 46, p. 11814, 2005.
- Z. Qiu, T. Ikehara, T. Nishi, Polymer, Vol. 44, p. 7519, 2003.
- L. Miao, Z. Qiu, W. Yang, T. Ikehara, Reactive & Functional Polymers, Vol. 68, p. 446, 2008.
- A. Javadi, A. J. Kramschuster, S. Pilla, J. Lee, S. Gong, L. S. Turng, Polymer Engineering and Science, Vol. 50, p. 1440, 2010.
- G. Mabilleau, M.F. Moreau, R. Filmon, M.F. Basle, D. Chappard, Biomaterials, Vol. 25, p. 5155, 2004.
- J. Li, M.F. Lai, J.J. Liu, Journal of Applied Polymer Science, Vol. 98, p. 1427, 2005.
- S. Singh, A.K. Mohanty, Composites Science and Technology, Vol. 67, p. 1753, 2007.
- R. Bhardwaj, A.K. Mohanty, L.T. Drzal, F. Pourboghrat, M. Misra, Biomacromolecules, Vol. 7, p. 2044, 2006.
- A. Dufresne, D. Dupeyre, M. Paillet, Journal of Applied Polymer Science, Vol. 87, p. 1302, 2003.
- S. Luo, A.N. Netravali, Journal of Materials Science, Vol. 34, p. 3709, 1999.
- M. Avella, G.B. Gaceva, A. Buzarovska, M.E. Errico, G. Gentile, Journal of Applied Polymer Science, Vol. 104, p. 3192, 2007.
- S. Singh, A. K. Mohanty, T. Sugie, Y. Takai, H. Hamada, Composites: Part A, Vol. 39, p. 875, 2008.
- G. Rota, E. Martuscelli, M. Raimo, P. Sadocco, G. Elegir, Journal of Materials Science, Vol. 35, p. 829, 2000.
- N.M. Barkoula, S.K. Garkhail, T. Peijs, Industrial Crops and Products, Vol. 31, p. 34, 2010.
- A.K. Bledzki, A. Jaszkiewicz, Composites Science and Technology, Vol. 70, p. 1687, 2010.
- A. Javadi, Y. Srithep, S. Pilla, J. Lee, S. Gong, L. S. Turng, Materials Science and Engineering: C, Vol. 30, p. 749, 2010.
- G.X. Chen, G.J. Hao, T.Y. Guo, M.D. Song, B.H. Zhang, Journal of Applied Polymer Science, Vol. 93, p. 655, 2004.
- G.X. Chen, G.J. Hao, T.Y. Guo, M.D. Song, B.H. Zhang, Journal of Materials Science Letters, Vol. 21, p. 1587, 2002.
- W.M. Choi, T.W. Kim, O.O. Park, Y.K. Chang, J.W. Lee, Journal of Applied Polymer Science, Vol. 90, p. 525, 2003.
- N. Galego, C. Rozsa, R. Sanchez, J. Fung, A. Vazquez, J. S. Tomas, Polymer Testing, Vol. 19, p. 485, 2000.
- E. I. Shishatskaya, I.A. Khlusov, T. G. Volova, Journal of Biomaterials Science-Polymer Edition, Vol. 17, p. 481, 2006.
- S. M. Cool, B. Kenny, A. Wu, V. Nurcombe, M. Trau, A.I. Cassady, L. Grondahl, Journal of Biomedical Materials Research, Vol. 82, p. 599, 2007.
- H. Y. Li, J. Chang, Biomaterials, Vol. 25, p. 5473, 2004.
- H. Y. Li, W. Y. Zhai, J. Chang, Journal of Materials Science-Materials in Medicine, Vol. 19, p. 67, 2008.
- Y. Liu, M. Wang, Key Engineering Materials, Vol. 334-335, p. 1217, 2007.
- Y. D. Zheng, Y. J. Wang, H. A. Yang, X. F. Chen, Z. H. Chen, Journal of Biomedical Materials Research Part B-Applied Biomaterials, Vol. 80, p. 236, 2007.
- Y. D. Zheng, Y. J. Wang, X. F. Chen, Y. B. Ren, G. Wu, Chemical Journal of Chinese Universities-Chinese, Vol. 24, p. 1325, 2003.
- S. Gong, L.S. Turng, C. Park, L. Liao, “ Microeellular Polymer Nanocomposites for Packaging and other Applications”, in: A. Mohanty, M. Misra, H.S. Nalwa, eds., Packaging Nanotechnology, American Scientific Publishers, pp. 144, 2008.
- J. Choi, S. Y. Lee, Applied Microbiology and Biotechnology, Vol. 53, 646, 2000.
- S. Iadevaia, N.V. Mantzaris, Journal of Biotechnology, Vol. 128, p. 615, 2007.
- A.J. Anderson, E.A. Dawes, Microbiological Reviews, Vol. 54, p. 450, 1990.
- D. Byrum, Microbiological Reviews, Vol. 102, p. 247, 1992.
- PA. Holmes, S.H. Collins, F. Wright, 3-Hydroxybutyrate Polymers. US Patent 4477654, 1984.
- Y. Poirier, C. Nawrath, C. Somerville, Biotechnology, Vol. 13, p. 142, 1995.
- F.R. van der Leij, B. Witholt, Canadian Journal of Microbiology, Vol. 41, p. 222 1995.
- Y. Poirier, Nature Biotechnology, Vol. 17, p. 960, 1999.
-
S. Slater,
T. A. Mitsky,
K. L. Houmiel,
M. Hao,
S. E. Reiser,
N. B. Taylor,
M. Iran,
H. E. Valentin,
D. J. Rodriguez,
D. A. Stone,
S. R. Padgette,
G. Kishore,
K. J. Gruys,
Nature Biotechnology,
Vol. 17,
p. 1011, 1999.
10.1038/13711 Google Scholar
- V. Martini, N.P. Suh, F.A. Waldman, Microcellular Closed Cell Foams and Their Method of Manufacture, U.S. Patent, 4473665, 1984.
- G. B. Okonishnikov, E. I. Blednykh, V. P. Skripov, Polimerov, Vol. 2, p. 370, 1973.
- D.F. Baldwin, N.P. Suh, ANTEC Technical Paper, p. 1503, 1992.
- D. Pierick, D. Szczurko, Trexel Technical Papers, Trexel Inc., 1998.
- C. B. Park, N. P. Suh, Cellular Polymers, Vol. 38, p. 69, 1992.
- J. Xu, D. Pierick, Journal of Injection Molding Technology, Vol. 5, p. 152, 2001.
- H.E. Naguib, C.B. Park, P.C. Lee, Journal of Cellular Plastics, Vol. 39, p. 499, 2003.
- A. K. Bledzki, O. Faruk, H. Kirschling, J. Kuhn, A. Jaszkiewicz, Polimery, Vol. 51, p. 697, 2006.
- K.A. Seeler, V. Kumar, Journal of Reinforced Plastics and Composites, Vol. 12, p. 359, 1993.
- D.I. Collias, D.G. Baird, Polymer, Vol. 35, p. 3978, 1994.
- M. Shimbo, D.F. Baldwin, N.P. Suh, Polymer Engineering and Science, Vol. 35, p. 1387, 1995.
- H. F. Mark, N. G. Gaylord, N. M. Bikales, Encyclopedia of Polymer Science and Technology, New York, London, Sydney, Inter science Publishers (Wiley & Sons), 1964.
- J. Brandup, E. H. Immergut, Polymer Handbook New York: Inter science Publishers (Wiley & Sons), 1975.
- M. Scandola, G. Ceccorulli, M. Pizzoli, M. Gazzano, Macromolecules, Vol. 25, p. 1405, 1992.
- Y.S. Chun, W.N. Kim, Polymer, Vol. 41, p. 2305, 2000.
- S. M. Tan, J. Ismail, C. Kummerlowe, H. W. Kammer, Journal of Applied Polymer Science, Vol. 101, p. 2776, 2006.
- V.E. Reinsch, S.S. Kelley, Journal of Applied Polymer Science, Vol. 64, p. 1785, 1997.
- P. Gatenholm, J. Kubat, A. Mathiasson, Journal of Applied Polymer Science, Vol. 45, p. 1667, 1992.
- M. Avella, E. Martuscelli, B. Pascucci, M. Raimo, B. Focher, A. Marzetti, Journal of Applied Polymer Science, Vol. 49, p. 2091, 1993.
- S. Luo, A.N. Netravali, Polymer Composites, Vol. 20, p. 367, 1999.
- A. Buzarovska, G. Bogoeva-Gaceva, A. Grozdanov, M. Avella, G. Gentile, M. Errico, Journal of Materials Science, Vol. 42, p. 6501, 2007.
- M. Avella, E. Martuscelli, M. Raimo, Journal of Materials Science, vol. 35, p. 523, 2000.
- M. Kunioka, Y. Doi, Macromolecules, Vol. 23, p. 1933, 1990.
- M.J. Jenkins, Y. Cao, L. Howell, G.A. Leeke, Polymer, Vol. 48, p. 6304, 2007.
- S. Bruzaud, A. Bourmaud, Polymer Testing, Vol. 26, p. 652, 2007.
- P. Bordes, E. Pollet, L. Avérous, Progress in Polymer Science, Vol. 34, p. 125, 2009.
- A. Javadi, Y. Srithep, S. Pilla, J. Lee, C. Clemons, S. Gong, L. S. Turng, Composites Part A: Applied Science and Manufacturing, Vol. 41, p. 982, 2010.
- F. Biddlestone, A. Harris, J. N. Hay, Polymer International, Vol. 39, p. 221, 1996.
- P. A. Holmes, “ In Developments in Crystalline Polymer”, in D. C. Bassett, ed., Cambridge University Press: Cambridge, England, 1981.
- G. J. M. Koning, A. H. C. Scheeren, P. J. Lemstra, M. Peeters, H. Reynaers, Polymer Vol. 35, p. 4598, 1994.
- P. J. Barham, A. Keller, Journal of Polymer Science Part B: Polymer Physics, Vol. 24, p. 69, 1986.
- A. El-Hadi, R. Schnabel, E. Straube, G. Mueller, S. Henning, Polymer Testing, Vol. 21, p. 665, 2002.
- J. K. Hobbs, T. J. McMaaster, M. J. Miles, P. J. Barham, Polymer, Vol. 37, p. 3241, 1996.
- J. L. Willett, M. A. Kotnis, G. S. O'Brien, G. F. Fanta, S. H. Gordon, Journal of Applied Polymer Science, Vol. 70, p. 1121, 1998.
- R. L. Shogren, Journal of Environmental Polymer Degradation, Vol. 3, p. 75, 1995.
- S. Wang, P. Ma, R. Wang, S. Wang, Y. Zhang, Y. Zhang, Polymer Degradation and Stability, Vol. 93, p. 1364, 2008.
- C. M. Buchanan, S. C. Gedon, A. W. White, M. D. Wood, Macromolecules, Vol. 25, p. 7373, 1992.
- B. M. P. Ferreira, C. A. C. Zavaglia, E. A. R. Duek, Journal of Applied Polymer Science, Vol. 86, p. 2898, 2002.
- P. Gatenholm, A. Mathiasson, Journal of Applied Polymer Science, Vol. 51, p. 1231, 1994.
- G.-Q. Chen, Q. Wu, Biomaterials, Vol. 26, 6565, 2005.
- C. Kunze, T. Freier, S. Kramer, K.P. Schmitz, Journal of Materials Science-Materials in Medicine, Vol. 13, p. 1051, 2002.
-
P.J. Hocking,
R.H. Marchessault, in:
G.J.L. Griffin, editor.
Chemistry and Technology of Biodegradable: Polymers,
London, Chapman & Hall,
pp. 48,
1994.
10.1007/978-94-011-1330-4_4 Google Scholar
- C. Doyle, E.T. Tanner, W. Boneld, Biomaterials, Vol. 12, p. 841, 1991.
- J.C. Knowles, G.W. Hastings, H. Ohta, S. Niwa, N. Boeree, Biomaterials, Vol. 13, p. 491, 1992.
- L.J. Chen, M. Wang, Biomaterials, Vol. 23, p. 2631, 2002.
- R.C. Young, M. Wiberg, G. Terenghi, British Journal of Plastic Surgery, Vol. 55, p. 235, 2002.
- B. Kramp, H.E. Bernd, W.A. Schumacher, M. Blynow, W. Schmidt, C. Kunze, D. Behrend, K.P. Schmitz, Laryngo-Rhino-Otologie, Vol. 81, p. 351, 2002.
- L.N. Novikov, L.N. Novikova, A. Mosahebi, M. Wiberg, G. Terenghi, J.O. Kellerth, Biomaterials, Vol. 23, p. 3369, 2002.
- J. Ni, M. Wang, Materials Science and Engineering: C, Vol. 20, p. 101, 2002.
- E.I. Shishatskaya, T.G. Volova, A.P. Puzyr, O.A. Mogilnaya, S.N. Efremov, Journal of Materials Science-Materials in Medicine, Vol. 15, p. 719, 2004.
- S. Gogolewski, M. Jovanovic, S.M. Perren, J.G. Dillon, M.K. Hughes, Journal of Biomedical Materials Research, Vol. 27, p. 1135, 1993.
- Y. Tesema, D. Raghavan, J. Stubbs, Journal of Applied Polymer Science, Vol. 93, 2445, 2004.
- Y. Ke, Y.J. Wang, L. Ren, Q.C. Zhao, W. Huang, Acta Biomaterialia, Vol. 6, p. 1329, 2010.
- A.R. Santos, B.M.P. Ferreira, E.A.R. Duek, H. Dolder, R.S. Wada, M.L.F. Wada, Artificial Organs, Vol. 28, p. 381, 2004.
- Z.B. Luklinska, H. Schluckwerder, Journal of Microscopy-Oxford, Vol. 211, p. 211, 2003.
- H. Li, J. Chang, Polymer Degradation and Stability, Vol. 87, p. 301, 2005.
- H. Y. Li, W. Y. Zhai, J. Chang, Journal of Biomaterials Applications, Vol. 24, p. 231, 2009.
- A. A. Shah, F. Hasan, A. Hameed, S. Ahmed, Biotechnology Advances, Vol. 26, p. 246, 2008.
- G. Kale, T. Kijchavengkul, R. Auras, M. Rubino, S. E. Selke, S. P. Singh, Macromolecular Bioscience, Vol. 7, p. 255, 2007.
- H.O.W. Eggins, T.A. Oxley, International Biodeterioration and Biodegradation, Vol. 48, p. 12, 2001.
- J.H. Walsh, International Biodeterioration and Biodegradation, Vol. 48, p. 16, 2001.
- N. Lucas, C. Bienaime, C. Belloy, M. Queneudec, F. Silvestre, J. E. Nava-Saucedo, Chemosphere, Vol. 73, p. 429, 2008.
-
G. Scott,
Polymers in Modern Life: Polymers and the Environment,
Cambridge, UK, The Royal Society of Chemistry,
1999.
10.1039/9781847551726-00001 Google Scholar
- W.D. Luzier, Proceedings of the National Academy of Sciences of the United States of America, Vol. 89, p. 839, 1992.
- S. Gogolewski, M. Jovanovic, S.M. Perren, M.K. Hughes, Journal of Biomedical Materials Research, Vol. 27, p. 1135, 1993.
- Y. Kumagai, Y. Doi, Polymer Degradation and Stability, Vol. 36, p. 241, 1992.
- H. Satoh, N. Yoshie, Y. Inoue, Polymer, Vol. 35, 286, 1994.
- H. Verhoogt, N. St Pierre, F. S. Truchon, B. A. Ramsay, B. D. Favis, J. A. Ramsay, Canadian Journal of Microbiology, Vol. 41, p. 323, 1995.
- B. A. Ramsay, V. Langlade, P. J. Carreau, J. A. Ramsay, Journal of Applied Environmental Microbiology, Vol. 59, p. 1242, 1993.
- M. Avella, L. Calandrelli, B. Immirizi, M. Malinconico, E. Martuscelli, B. Pascucci, P. Sadcco, Journal of Environmental Polymer Degradation, Vol. 3, p. 49, 1995.
- C.A. Lauzier, C.J. Monasterios, I. Saracovan, R.H. Marchessault, B.A. Ramsay, Tappi Journal, Vol. 76, p. 71, 1993.
- P. A. Holmes, UK Patent Application, Great Britain, 2160208, 1985.
- R.N. Reusch, Canadian Journal of Microbiology, Vol. 41, p. 50, 1995.
- C.W. Pouton, S. Akhtar, Advanced Drug Delivery Review, Vol. 18, p. 133, 1996.
