Volume 10, Issue 1 018750 pp. 25-40
Article
Open Access

Ultraviolet Laser Photoablation of Polymers: A Review and Recent Results

Sylvain Lazare

Sylvain Lazare

Laboratoire de Photophysique et Photochimie Moléculaire UA CNRS 348, Université de Bordeaux I 351 Cours de la Liberation Talence F-33405, France , u-bordeaux1.fr

Search for more papers by this author
Vincent Granier

Vincent Granier

Laboratoire de Photophysique et Photochimie Moléculaire UA CNRS 348, Université de Bordeaux I 351 Cours de la Liberation Talence F-33405, France , u-bordeaux1.fr

Search for more papers by this author
First published: 06 June 1988
Citations: 166

Abstract

The evolution since 1982, of far-UV laser photoablation of polymers is described. The experimental data can be fitted by using a dynamic model which states that the irradiated interface moves at a rate proportional to the difference between, the intensity reaching it, and the ablation threshold intensity

urn:x-wiley:02786273:media:lc018750:lc018750-math-0001( )
. The screening effect of the ablated gaseous products is taken into account. The experimental etch depth versus fluence, obtained with our new quartz crystal microbalance technique, can be fitted by adjusting two parameters of this model; the mean absorption coefficient of the products
urn:x-wiley:02786273:media:lc018750:lc018750-math-0002( )
and the so-called ablation rate constant k, which is the etch rate for
urn:x-wiley:02786273:media:lc018750:lc018750-math-0003( )
MW/cm2. These two parameters are wavelength dependent. The model allows also the calculation of the dose of absorbed energy as a function of depth in the material. For each layer of the ablated depth, the dose absorbed before and after (reabsorption of the gas products) ablation are distinguished. The dose of reexcitation varies highly with fluence and the distribution of gas products broadens accordingly. However, primary products need to be studied. Surface products are formbd on the final surface, during the postablation phase of the pulsed irradiation. The probable mechanism of the evolution of excitation energy is discussed, with stress on the elementary steps leading to heat production.

The perspectives of evolution of etching and patterning polymer surfaces by far-UV photoablation are high in basic research and technology.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.