Design approach for realizing two-dimensional electromagnetic band gap structures

George S. A. Shaker,

George S. A. Shaker

Department of Electrical and Computer Engineering, University of Waterloo, Waterloo, ON, Canada, N2L 3G1

Search for more papers by this author

Safieddin Safavi-Naeini,

Safieddin Safavi-Naeini

Department of Electrical and Computer Engineering, University of Waterloo, Waterloo, ON, Canada, N2L 3G1

Search for more papers by this author

George S. A. Shaker,

George S. A. Shaker

Department of Electrical and Computer Engineering, University of Waterloo, Waterloo, ON, Canada, N2L 3G1

Search for more papers by this author

Safieddin Safavi-Naeini,

Safieddin Safavi-Naeini

Department of Electrical and Computer Engineering, University of Waterloo, Waterloo, ON, Canada, N2L 3G1

Search for more papers by this author

First published: 27 March 2007

https://doi.org/10.1002/mop.22382

About

PDF

Tools

Share a link

Email
Wechat
Bluesky

Abstract

This paper presents a simple approach for designing two-dimensional electromagnetic band gap structures (EBGs). The approach is based on designing a planar band pass filter at a desired center frequency. A simple modification is introduced to the well known design steps of the filter. This modification allows for specifying the high impedance property of the structure, as well as its stop band, using a circuit simulator. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49:1189–1192, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22382

REFERENCES

1 D.F. Sievenpiper, High-impedance electromagnetic surfaces, Ph.D. dissertation, UCLA, Electrical Engineering department, January, 1999.
Google Scholar
2 F. Yang, K. Ma, Y. Qian, and T. Itoh, A uniplanar compact photonic-bandgap (UC-PBG) structure and its applications for microwave circuit, IEEE Trans Microw Theory Techniq 47 (1999), 1509–1514.
10.1109/22.780402
Web of Science® Google Scholar
3 H. Mosallaei and K. Sarabandi, A compact wide-band ebg structure utilizing embedded resonant circuits, IEEE Antennas Wireless Propag Lett 4 (2005), 5–8.
10.1109/LAWP.2004.841213
Web of Science® Google Scholar
4 F. Yang and Y. Rahmat-Samii, Polarization dependent electromagnetic band-gap surfaces: characterization, design, and applications, IEEE Antennas and Propagation Society International Symposium, vol. 3, June 2003, pp. 339–342.
Google Scholar
5 S. Maci and P.S. Kildal, Hard and soft surfaces realized by FSS printed on a grounded dielectric slab, IEEE Antennas and Propagation Society International Symposium, vol. 1, June 2004, pp. 285–288.
Google Scholar
6 T. Kamgaing and O.M. Ramahi, Design and modeling of high-impedance electromagnetic surfaces for switching noise suppression in power planes, IEEE Trans Electromag Compatib 47 (2005), 479–489.
10.1109/TEMC.2005.850692
Web of Science® Google Scholar
7 B.A. Munk, Frequency selective surfaces: theory and design, Wiley, New York, 2000.
10.1002/0471723770
Google Scholar
8 G.L. Matthaei, L. Young, and E.M.T. Jones, Microwave filters, impedance-matching networks, and coupling structures, Artech House, Dedham, MA, 1980.
Google Scholar
9 J.S. Hong and M.J. Lancaster, Microstrip filters for RF/microwave applications, Wiley, 2001.
10.1002/0471221619
Google Scholar
10 Ansoft Corporation Products. FEM Based HFSS and MOM Based Designer. www.ansoft.com
Google Scholar
11 ADS from Agilent Technologies. www.agilent.com
Google Scholar
12 C.A. Balanis, Advanced engineering electromagnetics, Wiley, 1989.
Google Scholar

Volume49, Issue5

May 2007

Pages 1189-1192

Design approach for realizing two-dimensional electromagnetic band gap structures

Abstract

REFERENCES

References

Information

About Wiley Online Library

Help & Support

Opportunities

Connect with Wiley

Design approach for realizing two-dimensional electromagnetic band gap structures

Abstract

REFERENCES

References

Related

Information