Volume 8, Issue 4 pp. 981-988
Original Research
Full Access

Reduction of field of view in MRI using a surface-spoiling local gradient insert

David G. Wiesler PhD

Corresponding Author

David G. Wiesler PhD

Laboratory of Cardiac Energetics, National Heart, Lung and Blood Institute, National Institutes of Health, Building 10, Room B1D-161, MSC-1061, 10 Center Drive, Bethesda, MD 20892-1061

Laboratory of Cardiac Energetics, National Heart, Lung and Blood Institute, National Institutes of Health, Building 10, Room B1D-161, MSC-1061, 10 Center Drive, Bethesda, MD 20892-1061Search for more papers by this author
Han Wen PhD

Han Wen PhD

Laboratory of Cardiac Energetics, National Heart, Lung and Blood Institute, National Institutes of Health, Building 10, Room B1D-161, MSC-1061, 10 Center Drive, Bethesda, MD 20892-1061

Search for more papers by this author
Steven D. Wolff MD, PhD

Steven D. Wolff MD, PhD

Laboratory of Cardiac Energetics, National Heart, Lung and Blood Institute, National Institutes of Health, Building 10, Room B1D-161, MSC-1061, 10 Center Drive, Bethesda, MD 20892-1061

Search for more papers by this author
Robert S. Balaban PhD

Robert S. Balaban PhD

Laboratory of Cardiac Energetics, National Heart, Lung and Blood Institute, National Institutes of Health, Building 10, Room B1D-161, MSC-1061, 10 Center Drive, Bethesda, MD 20892-1061

Search for more papers by this author
First published: 17 November 2005
Citations: 14

Abstract

Herein is presented a method for suppressing the magnetic resonance signal to a controlled depth by applying a spatially heterogeneous spoiler field between the slice-select and readout pulses. Eliminating the signal from near-surface regions allows one to shrink the field of view without introducing aliasing artifacts, thereby decreasing imaging time over a smaller defined volume. A unique planar magnetic gradient coil was constructed to generate the spoiler field. Phantom and human subject studies showed that the signal can be suppressed to controlled distances of up to 90 mm from the coil, with modest requirements on power supplies, pulse sequences, and materials, and with no increase in imaging time.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.