Volume 37, Issue 6 pp. 764-780
Research Article

Linearity analysis in pipeline A/D converters

Behnam Sedighi

Corresponding Author

Behnam Sedighi

Department of Electrical Engineering, Sharif University of Technology, Azadi Ave., Tehran, Iran

Department of Electrical Engineering, Sharif University of Technology, Azadi Ave., Tehran, IranSearch for more papers by this author
Mehrdad Sharif Bakhtiar

Mehrdad Sharif Bakhtiar

Department of Electrical Engineering, Sharif University of Technology, Azadi Ave., Tehran, Iran

Search for more papers by this author
First published: 18 June 2008
Citations: 9

Abstract

A method for estimating integral nonlinearity (INL) in pipeline analog-to-digital converters is presented. In this method, errors in each stage are modeled by an equivalent input-referred gain error and an input-referred nonlinearity. For a switched capacitor implementation, the proposed model predicts the maximum statistical INL in terms of capacitor mismatch and also provides an exact formula for INL in terms of finite gain of operational amplifiers. Using this model, it is proved that a high per-stage resolution reduces the power consumption in low-speed converters, whereas in high-speed circuits 1.5-bit or 2.5-bit stage is more advantageous. It is also shown that when voltage swing is below 1 V, the lower limit for the size of the capacitors is mainly determined by thermal noise rather than by INL. Copyright © 2008 John Wiley & Sons, Ltd.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.