Effect of curing agents on some properties of a polysulfide sealant

The effect of curing agents on the properties of a polysulfide sealant composition was investigated. Commercially used curing agents, namely, lead dioxide, manganese dioxide, and ammonium dichromate, were selected for this study. It was established that curing agents affect joint strengths, stress–strain properties, dynamic mechanical properties, and thermal stability of the sealant. Sealant cured with ammonium dichromate had highest shear bond strength, ultimate tensile strength, modulus, and thermal stability, whereas these properties were lowest for lead-dioxide-cured sealant. Peel bond strength and elongation at break were highest for lead-dioxide-cured sealant. The observed changes in properties were attributed to the difference in crosslink density of the cured sealant, produced by the curing agents. The curing agents have no appreciable effect on the fuel resistance of the polysulfide sealant.