Study on the Toughness of X100 Pipeline Steel Heat Affected Zone

Xueda Li,

Xueda Li

School of Material Science and Engineering, University of Science and Technology Beijing, Beijing, China

Search for more papers by this author

Chengjia Shang,

Chengjia Shang

School of Material Science and Engineering, University of Science and Technology Beijing, Beijing, China

Search for more papers by this author

Xiaoping Ma,

Xiaoping Ma

Department of Material Science and Engineering, McMaster University, Hamilton, L8S 4L8, Canada

Search for more papers by this author

S.V. Subramanian,

S.V. Subramanian

Department of Material Science and Engineering, McMaster University, Hamilton, L8S 4L8, Canada

Search for more papers by this author

Xueda Li,

Xueda Li

School of Material Science and Engineering, University of Science and Technology Beijing, Beijing, China

Search for more papers by this author

Chengjia Shang,

Chengjia Shang

School of Material Science and Engineering, University of Science and Technology Beijing, Beijing, China

Search for more papers by this author

Xiaoping Ma,

Xiaoping Ma

Department of Material Science and Engineering, McMaster University, Hamilton, L8S 4L8, Canada

Search for more papers by this author

S.V. Subramanian,

S.V. Subramanian

Department of Material Science and Engineering, McMaster University, Hamilton, L8S 4L8, Canada

Search for more papers by this author

The Minerals, Metals & Materials Society,

The Minerals, Metals & Materials Society

Search for more papers by this author

Book Author(s):The Minerals, Metals & Materials Society,

The Minerals, Metals & Materials Society

Search for more papers by this author

First published: 17 October 2014

https://doi.org/10.1002/9781119027973.ch72

Citations: 2

Summary

This chapter contains sections titled:

Introduction
Experimental
Results and Discussion
Conclusions
Acknowledgements

References

C. J. Shang, X. X. Wang, Q. Y. Liu, J. Y. Fu, “ Weldability of High Niobium X80 Pipeline Steel” (Paper presented at International Seminar on Welding of High Strength Pipeline Steel, TMS, Araxa, Brazil, 2011), 435-453.
Google Scholar
F. Matsuda, Y. Fukada, H. Okada, et al, “Review of mechanical and metallurgical investigations of martensite-austenite constituent in welded joints in Japan”, Welding in the world 37 (1996), 134–154.
Google Scholar
D. P. Fairchild, “ Local brittle zones in structural welds”, Welding Metallurgy of Structural Steels, ed. J. Y. Koo, (Warrendale, Pennsylvania, USA, TMS-AIME, 1987), 303–318.
Google Scholar
C. L. Davis, J. E. King, “Cleavage initiation in the intercritically reheated coarse-grained heat affected zone: Part I: Fractographic Evidence”, Metall. Mater. Trans. A, 25 (1994), 563–573.
10.1007/BF02651598
Web of Science® Google Scholar
C. L. Davis, “ Cleavage initiation in the intercritically reheated coarse grained heat affected zone of steels”, (PhD thesis, University of Cambridge, Cambridge, U. K., 1994).
Google Scholar
Y. Li, T. N. Baker, “Effect of morphology of martensite–austenite phase on fracture of weld heat affected zone in vanadium and niobium microalloyed steels”, J. Mater. Sci. Technol., 26 (2010), 1029–1040.
10.1179/026708309X12512744154360
CAS Web of Science® Google Scholar
J. H. Chen, Y. Kikuta, T. Araki, Yoneda, Y. Matsuda, “Micro-fracture behaviour induced by MA constituent (Island Martensite) in simulated welding heat affected zone of HT80 high strength low alloyed steel”, Acta Metall., 32 (1984), 1779–1788.
10.1016/0001-6160(84)90234-7
CAS Web of Science® Google Scholar
E. Bouyne, H. M. Flower, T. C. Lindley, A. Pineau, “Use of EBSD technique to examine microstructure and cracking in a bainitic steel”, Scripta Mater., 39 (1998), 295–300.
10.1016/S1359-6462(98)00170-5
CAS Web of Science® Google Scholar
D. A. Curry, “Cleavage micromechanisms of crack extension in steels”, Met. Sci., 14 (1980), 319–326.
10.1179/msc.1980.14.8-9.319
CAS Web of Science® Google Scholar
A. Lambert-Perlade, A. F. Gourgues, J. Besson, T. Sturel, A. Pineau, “ Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel”, Metall. Mater. Trans. A, 35A (2004), 1039-1053.
Google Scholar
J. Nohava, P. Hausild, M. Karlik, P. Bompard, “Electron backscattering diffraction analysis of secondary cleavage cracks in a reactor pressure vessel steel”, Mater. Charact., 49 (2003), 211–217.
10.1016/S1044-5803(02)00360-1
CAS Web of Science® Google Scholar
V. Venegas, F. Caleyo, J. L. Gonzalez, T. Baudin, J. M. Hallen, R. Penelle, “EBSD study of hydrogen-induced cracking in API-5 L-X46 pipeline steel”, Scripta Mater., 52 (2005), 147–152.
10.1016/j.scriptamat.2004.09.015
CAS Web of Science® Google Scholar
W. Anthony, Thompson, J. F. Knott, “ Micromechanisms of brittle fracture”, Metall. Trans. A, 24A (1993), 523-534.
Google Scholar
A. Pineau, Int. J. Fract., “Development of the local approach to fracture over the past 25 years-theory and applications”, 138 (2006), 139–166.
Web of Science® Google Scholar

Citing Literature

Energy Materials 2014