Use of Slow Strain Rate Tensile Testing to Assess the Ability of Several Superalloys to Resist Environmentally-Assisted Intergranular Cracking
Tim P. Gabb,
Jack Telesman,
Anthony Banik,
Erin McDevitt,
Tim P. Gabb
NASA Glenn Research Center; 21000 Brookpark Rd., Cleveland, Ohio 44135, USA
Search for more papers by this authorJack Telesman
NASA Glenn Research Center; 21000 Brookpark Rd., Cleveland, Ohio 44135, USA
Search for more papers by this authorAnthony Banik
ATI Allvac; 2020 Ashcraft Ave, Monroe, NC 28110, USA
Search for more papers by this authorErin McDevitt
ATI Allvac; 2020 Ashcraft Ave, Monroe, NC 28110, USA
Search for more papers by this authorTim P. Gabb,
Jack Telesman,
Anthony Banik,
Erin McDevitt,
Tim P. Gabb
NASA Glenn Research Center; 21000 Brookpark Rd., Cleveland, Ohio 44135, USA
Search for more papers by this authorJack Telesman
NASA Glenn Research Center; 21000 Brookpark Rd., Cleveland, Ohio 44135, USA
Search for more papers by this authorAnthony Banik
ATI Allvac; 2020 Ashcraft Ave, Monroe, NC 28110, USA
Search for more papers by this authorErin McDevitt
ATI Allvac; 2020 Ashcraft Ave, Monroe, NC 28110, USA
Search for more papers by this authorBook Editor(s):Eric Ott, Anthony Banik,
Joel Andersson,
Ian Dempster,
Tim Gabb, Jon Groh, Karl Heck, Randy Helmink,
Xingbo Liu,
Agnieszka Wusatowska-Sarnek,
Anthony Banik
Search for more papers by this authorJoel Andersson
Search for more papers by this authorIan Dempster
Search for more papers by this authorRandy Helmink
Search for more papers by this authorXingbo Liu
Search for more papers by this authorAgnieszka Wusatowska-Sarnek
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Materials and Procedures
-
Results and Discussion
-
Summary and Conclusions
-
Acknowledgements
References
- A. Pineau, S. D. Antolovich, “High Temperature Fatigue of Nickel-Base Superalloys-A Review With Special Emphasis on Deformation Modes and Oxidation”, Engineering Failure Analysis, Vol. 17, 2009, pp. 2668–2697.
- D. A. Woodford, “Gas Phase Embrittlement and Time Dependent Cracking of Nickel Based Superalloys”, Energy Materials, Vol. 1, No. 1, 2006, pp. 59–79.
- M.R. Bache, J.P. Jones, G.L. Drew, M.C. Hardy, N. Fox, “Environment and Time Dependent Effects on the Fatigue Response of an Advanced Nickel Base Superalloy,” Int. J. Fatigue. V. 31, 2009, pp. 1719–1723.
- J. Telesman, T. Gabb, Y. Yamada, L. Ghosn, D. Hornbach, N. Jayaraman, “ Dwell Notch Low Cycle Fatigue Behavior of a Powder Metallurgy Nickel Disk Alloy”, Superalloys 2012: 12th International Symposium on Superalloys, ed. E. S. Huron, R. C. Reed, M. C. Hardy, M. J. Mills, R. E. Montero, P. D. Portella, J. Telesman, TMS, Warrendale, PA, 2012, pp. 853–862.
10.1002/9781118516430.ch94 Google Scholar
- K. R. Bain, M. L. Gambone, J. M. Hyzak, M. C. Thomas, “ Development of Damage Tolerant Microstructures in Udimet 720”, Superalloys 1988: 5th International Symposium on Superalloys. ed. S. Reichman, D. N. Duhl, G. Maurer, S. ANtolovich, C. Lund, TMS, Warrendale, PA, 1988, pp. 13–22.
10.7449/1988/Superalloys_1988_13_22 Google Scholar
- R. Molins, G. Hochstetter, J. C. Chassaigne, E. Andrieu, “Oxidation Effects on the Fatigue Crack Growth Behaviour of Alloy 718 at High Temperature,”, Acta Mater., Vol. 45, No. 2, 1997, pp. 663–674.
- J. Telesman, T. P. Gabb, A. Garg, P. Bonacuse, J. Gayda, “ Effect of Microstructure on Time Dependent Fatigue Crack Growth Behavior in a P/M Turbine Disk Alloy”, Superalloys 2008, ed. R. C. Reed, K. A. Green, P. Caron, T. P. Gabb, M. G. Fahrmann, E. S. Huron, S. A. Woodard, TMS, Warrendale, PA, 2008, pp. 807–816.
- T. P. Gabb, J. Telesman, P. T. Kantzos, A. Garg, “Effects of Temperature on Failure Modes for a Nickel-Base Disk Superalloy”, J. Failure Analysis and Prevention, V. 7, Feb. 2007, pp. 56–65.
10.1007/s11668-006-9002-4 Google Scholar
- ASTM G129-00(2013), “ Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking,” ASTM Book of Standards Volume 03.02, 2013.
- J. J. deBarbadillo, S. K. Mannan, “ Alloy 718 for Oilfield Applications”, Proceedings of the 7th International Symposium on Superalloy 718 and Derivatives, ed. E. A. Ott, J. R. Groh, A. Banik, I. Dempster, T. P. Gabb, R. Helmink, X. Liu, A. Mitchell, G. P. Sjoberg, A. Wusatowska-Sarnek, TMS, Warrendale, PA, 2010, pp. 255–270.
- R. L. Kennedy, “ Allvac 718Plus, Superalloy for the Next Forty Years”, Superalloy 718, 625, 706, and Derivatives, ed. E. A. Loria, The Minerals, Metals & Materials Society, 2005, pp. 1–14.
10.7449/2005/Superalloys_2005_1_14 Google Scholar
- Inconel 740: Special Metals Corporation Publication No. SMC-090, 2004.
- L. M. Pike, “ Long Term Thermal Exposure of Haynes 282 Alloy,” Proceedings of the 7th International Symposium on Superalloy 718 and Derivatives, ed. E. A. Ott, J. R. Groh, A. Banik, I. Dempster, T. P. Gabb, R. Helmink, X. Liu, A. Mitchell, G. P. Sjoberg, A. Wusatowska-Sarnek, TMS, Warrendale, PA, 2010, pp. 645–660.
- C. Sudbrack, S. Draper, T. Gorman, J. Telesman, T. Gabb, D. Hull, “ Oxidation and the Effects of High Temperature Exposures on Notched Fatigue Life of an Advanced Powder Metallurgy Disk Superalloy”, Superalloys 2012: 12th International Symposium on Superalloys, ed. E. S. Huron, R. C. Reed, M. C. Hardy, M. J. Mills, R. E. Montero, P. D. Portella, J. Telesman, TMS, Warrendale, PA, 2012, pp. 863–872.
10.1002/9781118516430.ch95 Google Scholar
- T. P. Gabb, J. Telesman, P. T. Kantzos, J. W. Smith, “ Effects of High Temperature Exposures on Fatigue Life of Disk Superalloys”, Superalloys 2004, ed. K. A. Green, H. Harada, T. E. Howson, T. M. Pollock, R. C. Reed, J. J. Schirra, S. Walston, TMS, Warrendale, PA, 2004, pp. 269–274. ASTM G129-00, slow strain rate tensile test.
- T. P. Gabb, J. Telesman, A. Garg, P. Lin, V. Provenzano, R. Heard, H. M. Miller, “ Grain Boundary Engineering the Mechanical Properties of Allvac 7188Plus Superalloy”, Proceedings of the 7th International Symposium on Superalloy 718 and Derivatives, ed. E. A. Ott, J. R. Groh, A. Banik, I. Dempster, T. P. Gabb, R. Helmink, X. Liu, A. Mitchell, G. P. Sjoberg, A. Wusatowska-Sarnek, TMS, Warrendale, PA, 2010, pp. 255–270.
