Effect of Aging Treatment on Pitting Corrosion and Corrosion Fatigue Crack Propagation Behavior of Oil-Grade Alloy 718
Jared S. Nutter,
Ting Chen,
Jeffrey Hawk,
Xingbo Liu,
Jared S. Nutter
National Energy Technology Laboratory; Albany, OR 97321-2198, USA
Department of Mechanical and Aerospace Engineering; West Virginia University; Morgantown, WV 26506, USA
Belcan Corporation; Cincinnati, OH 45242, USA
Search for more papers by this authorTing Chen
National Energy Technology Laboratory; Albany, OR 97321-2198, USA
Department of Mechanical and Aerospace Engineering; West Virginia University; Morgantown, WV 26506, USA
Search for more papers by this authorJeffrey Hawk
National Energy Technology Laboratory; Albany, OR 97321-2198, USA
Search for more papers by this authorXingbo Liu
National Energy Technology Laboratory; Albany, OR 97321-2198, USA
Department of Mechanical and Aerospace Engineering; West Virginia University; Morgantown, WV 26506, USA
Search for more papers by this authorJared S. Nutter,
Ting Chen,
Jeffrey Hawk,
Xingbo Liu,
Jared S. Nutter
National Energy Technology Laboratory; Albany, OR 97321-2198, USA
Department of Mechanical and Aerospace Engineering; West Virginia University; Morgantown, WV 26506, USA
Belcan Corporation; Cincinnati, OH 45242, USA
Search for more papers by this authorTing Chen
National Energy Technology Laboratory; Albany, OR 97321-2198, USA
Department of Mechanical and Aerospace Engineering; West Virginia University; Morgantown, WV 26506, USA
Search for more papers by this authorJeffrey Hawk
National Energy Technology Laboratory; Albany, OR 97321-2198, USA
Search for more papers by this authorXingbo Liu
National Energy Technology Laboratory; Albany, OR 97321-2198, USA
Department of Mechanical and Aerospace Engineering; West Virginia University; Morgantown, WV 26506, USA
Search for more papers by this authorBook Editor(s):Eric Ott, Anthony Banik,
Joel Andersson,
Ian Dempster,
Tim Gabb, Jon Groh, Karl Heck, Randy Helmink,
Xingbo Liu,
Agnieszka Wusatowska-Sarnek,
Anthony Banik
Search for more papers by this authorJoel Andersson
Search for more papers by this authorIan Dempster
Search for more papers by this authorRandy Helmink
Search for more papers by this authorXingbo Liu
Search for more papers by this authorAgnieszka Wusatowska-Sarnek
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Experimental Procedure
-
Results
-
Discussion
-
Conclusion
-
Acknowledgement
Reference
- J.J. Debarbadillo and S.K. Mannan, “Alloy 718 for Oilfield Applications,” JOM, 64 (2012): pp. 265-270
- J. Xu, H. John, G. Wiese and X. Liu, “ Oil-Grade Alloy 718 in Oil Field Drilling Application,” Superalloy 718 and Derivatives, ed. E.A. Ott et al.(Warrendale, PA: TMS, 2010): pp. 923–932.
- Z.F. Yin, W.Z. Zhao, W.Y. Lai and X.H. Zhao, “Electrochemical Behaviour of Ni-Base Alloys Exposed Under Oil/Gas Field Environments,” Corros. Sci., 51 (2009): pp. 1702-1706.
- R. Ayer, R.R. Mueller, J.Y. Koo and M. Watkins, “ Acceptability Criteria for Alloy 718 for Use in Sour Service,” (Paper presented at The Thirteenth International Offshore and Polar Engineering Conference, Honolulu, Hawaii, 25–30 May 2003): pp. 75-82.
- R.B. Bhavsar, A. Collins, and S. Silverman, “ Use of Alloy 718 and 725 in Oil and Gas Industry,” Superalloys 718, 625, 706 and Various Derivatives, ed. E.A. Loria (Warrendale, PA: TMS, 2001): pp. 47–55.
10.7449/2001/Superalloys_2001_47_55 Google Scholar
- J. Kolts, “ Alloy 718 for the Oil and Gas Industry,” Superalloy 718–Metallurgy and Applications, ed, E.A. Loria (Warrendale, PA: TMS, 1989): pp. 329–344.
10.7449/1989/Superalloys_1989_329_344 Google Scholar
- O.A. Onyewuenyi, “ Alloy 718–Alloy Optimization for Applications in Oil and Gas Production,” Superalloy 718–Metallurgy and Applications, ed. E.A. Loria (Warrendale, PA: TMS, 1989): pp. 345–362.
10.7449/1989/Superalloys_1989_345_362 Google Scholar
- API Standard 6A718, Specification of Nickel Base Alloy 718 (UNS N07718) for Oil and Gas Drilling and Production Equipment, American Petroleum Institute 2004.
- Aerospace Material Specification 5662M, Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, SAE International 2004.
- NACE Standard MR0175-2003, Standard Materials Requirements: Metal for Sulfide Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oilfield Environments, NACE International 2003.
- T. Chen, H. John, J. Xu, Q. Lu, J. Hawk and X. Liu, “Influence of Surface Modifications on Pitting Corrosion Behavior of Nickel-Base Alloy 718. Part 2: Effect of Aging Treatment,” Corros. Sci., 78 (2014): pp. 151-161.
- X. Liu, J. Xu, E. Barbero, W. Cao and R. Kennedy, “Effect of Thermal Treatment on the Fatigue Crack Propagation Behavior of a New Ni-Base Superalloy,” Mater. Sci. Eng. A, 474 (2008): pp. 30-38.
- L.A. James, and W.J. Mills, “Effect of Heat-Treatment and Heat-To-Heat Variations in the Fatigue-Crack Growth Response of Alloy 718”. Engineering Fracture Mechanics, 1985. 22(5): pp. 797–817.
- L.A. James and W.J. Mills, “Effect of Heat Treatment Upon Fatigue Crack Growth-Behavior of Alloy 718 Weldments. 1. Macroscopic Behavior”. Journal of Engineering Materials and Technology-Transactions of the Asme, 1985. 107(1): pp. 34–40.
- W.J. Mills and L.A. James, Effect of Heat Treatment upon Fatigue Crack Growth-Behavior of Alloy 718 Weldments. 2. Microscopic Behavior. Journal of Engineering Materials and Technology-Transactions of the Asme, 1985. 107(1): pp. 41–47.
- J.L. do Nascimento, C. Barbosa, and J.L. Fernandes, “Effect of Different Heat Treatment Conditions on the Microstructure and Mechanical Properties of Inconel 718 Nickel Based Super Alloy Used in Petroleum Production”. Praktische Metallographie-Practical Metallography, 2009. 46 (12): pp. 640–656.
- G.A. Rao, M. Kumar, M. Srinivas and D.S. Sarma, “Effect of Standard Heat Treatment on the Microstructure and Mechanical Properties of Hot Isostatically Pressed Superalloy Inconel 718”. Materials Science and Engineering: A, 2003. 355 (1–2): pp. 114–125.
- G. Yu, C. Wang, J. Huang, “ The Effects Of Heat Treatment And Hydrogen On The SCC Behavior Of Superalloy 718”, in NACE CORROSION 1996. 1996: Houston.
- J.M. Pereira and B.A. Lerch, “Effects of Heat Treatment on the Ballistic Impact Properties of Inconel 718 for Jet Engine Fan Containment Applications”. International Journal of Impact Engineering, 2001. 25 (8): pp. 715–733.
- J. Deleume, J.-M. Cloué, and E. Andrieu, “Influence of Δ Phase Precipitation on the Stress Corrosion Cracking Resistance of Alloy 718 in PWR Primary Water”. Journal of Nuclear Materials, 2008. 382 (1): pp. 70–75.
- S. Ghosh, S. Yadav, and G. Das, “Study of Standard Heat Treatment on Mechanical Properties of Inconel 718 Using Ball Indentation Technique”. Materials Letters, 2008. 62(17–18): pp. 2619–2622.
- L.W. Tsay, H.H. Lin, and R.K. Shiue, “Fatigue Crack Growth Behavior of Laser-Annealed IN 718 Alloy in Hydrogen”. Corrosion Science, 2004. 46(11): pp. 2651–2662.
- M. Clavel and A. Pineau, “Fatigue Behavior of 2 Nickel-base Alloys. 1. Experimental Results on Low-cycle Fatigue, Fatigue Crack-Propogation and Substructures”. Materials Science and Engineering, 1982. 55(2): pp. 157–171.
- M. Sundararaman, P. Mukhopadhyay, and S. Banerjee, “Deformation-Behavior of Gamma″ Strengthened INCONEL-718”. Acta Metallurgica, 1988. 36(4): p. 847-864.
- D.F. Paulonis, J.M. Oblak, and D.S. Duvall, “Precipitation in Nickel-Base Alloys 718”. Asm Transactions Quarterly, 1969. 62(3): pp. 611–622.
- C. Mercer, A.B.O. Soboyejo, and W.O. Soboyejo, “Micromechanisms of Fatigue Crack Growth in a Forged Inconel 718 Nickel-Based Superalloy”. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 1999. 270(2): pp. 308–322.
- Z.F. Wang, J. Li, J.Q. Wang and W. Ke, “The Influence of Loading Waveform on Corrosion Fatigue Crack Propagation,” Corros. Sci., 37 (1995): pp. 1551-1565.
- K. R. Cooper and R. G. Kelly, “Using Capillary Electrophoresis to Study the Chemical Conditions Within Cracks in Aluminum Alloys,” Journal of Chromatography A, 850 (1999): pp. 381-389.
- J. T. Ho and G. P. Yu, “Fatigue Behavior of Alloy-600 in NaCl Solution at Room Temperature,” Journal of Nuclear Materials, 226 (1995): pp. 226-237.
- B. MacDougall, “Effect of Chloride-ion on the Localized Breakdown of Nickel-Oxide Films,” Journal of The Electrochemical Society, 126 (1979): pp. 919-925.
- H. Ghonem, T. Nicholas, A. Pineau, “Elevated temperature fatigue crack growth in alloy 718—Part I: Effects of mechanical variables”. Fatig. Fract. Eng. Mater. Struct. 16 (1993): pp. 565–576.
- H. Ghonem, T. Nicholas, A. Pineau, “Elevated temperature fatigue crack growth in alloy 718—Part II: Effects of environmental and material variables”. Fatig. Fract. Eng. Mater. Struct. 16 (1993): pp. 577–590.
