Morphology and Kinetics of Grain Boundary Precipitation in Alloy ATI 718Plus®
A. Casanova,
M. Hardy, C.M.F. Rae,
A. Casanova
Department of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB2 3QZ, UK
Search for more papers by this authorC.M.F. Rae
Department of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB2 3QZ, UK
Search for more papers by this authorA. Casanova,
M. Hardy, C.M.F. Rae,
A. Casanova
Department of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB2 3QZ, UK
Search for more papers by this authorC.M.F. Rae
Department of Materials Science and Metallurgy, University of Cambridge, Pembroke Street, Cambridge CB2 3QZ, UK
Search for more papers by this authorBook Editor(s):Eric Ott, Anthony Banik,
Joel Andersson,
Ian Dempster,
Tim Gabb, Jon Groh, Karl Heck, Randy Helmink,
Xingbo Liu,
Agnieszka Wusatowska-Sarnek,
Anthony Banik
Search for more papers by this authorJoel Andersson
Search for more papers by this authorIan Dempster
Search for more papers by this authorRandy Helmink
Search for more papers by this authorXingbo Liu
Search for more papers by this authorAgnieszka Wusatowska-Sarnek
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Background
-
Experimental Methods
-
Results and Discussion
-
Conclusions
-
Acknowledgments
References
- R. Kennedy, “ Allvac® 718Plus™, superalloy for the next forty years,” in Superalloys 718 & Derivatives (2005), 1-14.
- M. Springmann, W. Rothkegel, D. Huenert, and H. Schlums, “ Introduction of the new nickel-base alloy ATI 718Plus® for critical parts,” in 7th International Conference on Low Cycle Fatigue (2013).
- L. Viskari, Y. Cao, M. Norell, G. Sjöberg, and K. Stiller, “Grain boundary microstructure and fatigue crack growth in Allvac 718Plus superalloy,” Mater. Sci. Eng. A, 528 (6) (2011), 2570-2580.
- K. Löhnert and F. Pyczak, “ Microstructure evolution in the nickel base superalloy Allvac 718PlusTM,” in Superalloys 718 & Derivatives (2010), 877-891.
- W. D. Cao, “ Solidification and solid state phase transformation of Allvac® 718Plus™ alloy,” in Superalloys 718 & Derivatives (2005).
- W. Cao and R. Kennedy, “ New developments in wrought 718-type superalloys,” Acta Metall. Sin., (2005).
- X. Xie, C. Xu, G. Wang, J. Dong, W. D. Cao, and R. Kennedy, “ TTT diagram of a newly developed nickel-base superalloy - Allvac® 718Plus™,” Mater. Res., (2005), 193-202.
- X. Xie, G. W. J. Dong, C. Xu, W. D. Cao, and R. Kennedy, “ Structure stability study on a newly developed nickel-base superalloy - Allvac® 718plus™,” in Superalloys 718 & Derivatives (2005), 179-191.
- E. J. Pickering, H. Mathur, A. Bhowmik, O. M. D. M. Messé, J. S. Barnard, M. C. Hardy, R. Krakow, K. Loehnert, H. J. Stone, and C. M. F. Rae, “Grain-boundary precipitation in Allvac 718Plus,” Acta Mater., 60 (2012), 2757-2769.
- O. Messé, J. Barnard, E. Pickering, P. Midgley, and C. Rae, “ On the precipitation of delta phase in ALLVAC 718Plus,” Philos. Mag., (2014).
- K. Löhnert, “ Einfluss der thermomechanischen Vorbehandlung auf die Eigenschaften der Nickelbasissuperlegierung A718Plus” (Ph.D. thesis, Universität Erlangen-Nürnberg, 2011).
- S. Oppenheimer, E. McDevitt, and W. D. Cao, “ Toughness as a function of thermomechanical processing and heat treatment in 718Plus (®) superalloy,” in Superalloys 718 & Derivatives (2010), 321-330.
- W. D. Cao and R. Kennedy, “ Recommendations for heat treating of Allvac 718Plus alloy parts,” (Allvac Technical Report, 2006).
- H. L. Eiselstein, “ Metallurgy of columbium-hardened nickel-chromium iron alloy,” Am. Soc. Test. Mater. Spec. Tech. Publ., (1965), 62-79.
- W. J. Boesch and H. B. Canada, “Precipitation reactions and stability of Ni3Cb in Inconel alloy 718,” in International Symposium on Structural Stability in Superalloys, 21 (10) (1968), 579-596.
10.7449/1968/Superalloys_1968_579_596 Google Scholar
- J. W. Brooks and P. J. Bridges, “ Metallurgical stability of Inconel alloy 718,” in Superalloys (1988), 33-42.
- A. Oradei-Basile and J. Radavich, “ A current TTT diagram for wrought alloy 718,” in Superalloys (1991).
- I. Kirman and D. Warrington, “The precipitation of Ni3Nb phases in a Ni-Fe-Cr-Nb alloy,” Metall. Trans., 1 (1970), 2667-2675.
- V. Beaubois, J. Huez, S. Coste, O. Brucelle, and J. Lacaze, “Short term precipitation kinetics of delta phase in strain free Inconel☆ 718 alloy,” Mater. Sci. Technol., 20 (8) (2004).
- M. Sundararaman, “Precipitation of the Delta (Ni3Nb) phase in two nickel base superalloys,” Mater. Trans. A, 19 (1988), 453-465.
- W. Liu, M. Yao, and Z. Chen, “Effect of cold rolling on the precipitation behavior of δ phase in INCONEL 718,” Metall. Mater. Trans. A, 30 (1999).
- Y. Huang and T. G. Langdon, “The evolution of delta-phase in a superplastic Inconel 718 alloy,” J. Mater. Sci., 42 (2) (2007), 421-427.
- D. Srinivasan, L. Lawless, and E. Ott, “Experimental determination of TTT diagram for alloy 718Plus®,” in Superalloys, 3 (2012), 759-768.
- R. Radis, G. A. Zickler, M. Stockinger, C. Sommitsch, and E. Kozeschnik, “ Numerical simulation of the simultaneous precipitation of δ and γ′ phases in the ni-base superalloy ATI Allvac® 718PlusTM,” in Superalloys 718 & Derivatives, (2010) 569-578.
- C. Stotter, “Characterization of d-phase in superalloy Allvac 718Plus,” Int. J. Mater. Res., 99 (2008), 376-380.
- J. Andersson, G. Sjöberg, and S. Hatami, “Notch sensitivity and intergranular crack growth in the allvac 718plus superalloy,” in ISABE Beijing, 1 (11) (2007), 1829-1841.
- E. T. McDevitt, “ Effect of temperature and strain during forging on subsequent delta phase precipitation during solution annealing in ATI 718Plus® alloy,” in Superalloys 718 & Derivatives (2010), 307-319.
- A. J. Schwartz, M. Kumar, and D. P. Field, “ Mapping and assessing plastic deformation using EBSD,” in Electron Backscatter Diffraction in Materials Science, Eds. Springer US (2009), 251-262.
10.1007/978-0-387-88136-2 Google Scholar
- R. Yoda, T. Yokomaku, and N. Tsuji, “Plastic deformation and creep damage evaluations of type 316 austenitic stainless steels by EBSD,” Mater. Charact., 61 (10) (2010), 913-922.
- M. Kamaya, “Measurement of local plastic strain distribution of stainless steel by electron backscatter diffraction,” Mater. Charact., 60 (2) (2009), 125-132.
- C. Dandre, C. Walsh, and R. Evans, “ Microstructural evolution of nickel base superalloy forgings during ingot to billet conversion: process modeling and validation,” in Superalloys (2000).
- G. J. Shiflet, M. A. Mangan, and W. G. Meng, “Growth by ledges,” Interface Sci., 154 (1998), 133-154.
