Finite Element Analysis Using a Dislocation Density Based Flow Stress Model Coupled with Model for Precipitate Evolution
Martin Fisk,
Andreas Lundbäck,
Joel Andersson,
Lars-Erik Lindgren,
Martin Fisk
Materials Science and Applied Mathematics, Malmö University, SE-205 06 Malmö, Sweden
Search for more papers by this authorAndreas Lundbäck
Dept. of Eng. Sciences and Mathematics, Luleå University of Technology, SE-971 87, Luleå, Sweden
Search for more papers by this authorJoel Andersson
GKN Aerospace Engine Systems, SE-461 81 Trollhättan, Sweden
Department of Engineering Science, University West, SE-461 86 Trollhättan, Sweden
Department of Materials and Manufacturing Technology, Chalmers University of Technology, SE-412 96 Gothenburg, Sweden
Search for more papers by this authorLars-Erik Lindgren
Dept. of Eng. Sciences and Mathematics, Luleå University of Technology, SE-971 87, Luleå, Sweden
Search for more papers by this authorMartin Fisk,
Andreas Lundbäck,
Joel Andersson,
Lars-Erik Lindgren,
Martin Fisk
Materials Science and Applied Mathematics, Malmö University, SE-205 06 Malmö, Sweden
Search for more papers by this authorAndreas Lundbäck
Dept. of Eng. Sciences and Mathematics, Luleå University of Technology, SE-971 87, Luleå, Sweden
Search for more papers by this authorJoel Andersson
GKN Aerospace Engine Systems, SE-461 81 Trollhättan, Sweden
Department of Engineering Science, University West, SE-461 86 Trollhättan, Sweden
Department of Materials and Manufacturing Technology, Chalmers University of Technology, SE-412 96 Gothenburg, Sweden
Search for more papers by this authorLars-Erik Lindgren
Dept. of Eng. Sciences and Mathematics, Luleå University of Technology, SE-971 87, Luleå, Sweden
Search for more papers by this authorBook Editor(s):Eric Ott, Anthony Banik,
Joel Andersson,
Ian Dempster,
Tim Gabb, Jon Groh, Karl Heck, Randy Helmink,
Xingbo Liu,
Agnieszka Wusatowska-Sarnek,
Anthony Banik
Search for more papers by this authorJoel Andersson
Search for more papers by this authorIan Dempster
Search for more papers by this authorRandy Helmink
Search for more papers by this authorXingbo Liu
Search for more papers by this authorAgnieszka Wusatowska-Sarnek
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Flow Stress Model
-
Results and Discussion
-
Conclusions
-
Acknowledgement
References
- M.C. Chaturvedi and Y. Han. Effect of particle size on the creep rate of superalloy inconel 718. Materials Science and Engineering, 89: 7-10, 1987.
- Luis Mendoza Camus and Göran Engberg. Elevated temperature deformation of cast inconel 718. High Temperature Materials and Processes, 9 (1): 27-38, 1989.
- C. Slama and M. Abdellaoui. Structural characterization of the aged inconel 718. Journal of Alloys and Compounds, 306: 277-284, 2000.
- M. Fisk and A. Lundbäck. Simulation and validation of repair welding and heat treatment of an alloy 718 plate. Finite Elements in Analysis and Design, 58: 66.73, 2012.
- J Gil Sevillano, P van Houtte, and E Aernoudt. Large strain work hardening and textures. Progress in Materials Science, 1981.
- H. J. Frost and M. F. Ashby. Deformation-mechanism maps: the plasticity and creep of metals and ceramics. Pergamon, Oxford, 1. ed. edition, 1982.
- Ales Svoboda, Dan Wedberg, and Lars-Erik Lindgren. Simulation of metal cutting using a physically based plasticity model. Modelling and Simulation in Materials Science and Engineering, 18 (7): 075005, 2010.
- Martin Fisk, John C. Ion, and Lars-Erik Lindgren. Flow stress model for alloy 718 accounting for evolution of precipitates. Computational Materials Science, 82: 531-539, 2014.
- Lars-Erik Lindgren, Konstantin Domkin, and Sofia Hansson. Dislocations, vacancies and solute diffusion in physical based plasticity model for aisi 3161. Mechanics of Materials, 40 (11): 907-919, 2008.
- E. Nembach and G Neite. Precipitation hardening of superalloys by ordered γ′-particles. Progress in Materials Science, 29: 177-319, 1985.
- E. Nembach, S. Schänzer, W. Schröer, and K. Trinckauf. Hardening of nickel-base superalloys by high volume fractions of γ′-precipitates. Acta Metallurgica, 36 (6): 1471-1479, 1988.
- Eckhard Nembach. The high temperature peak of the yield strength of γ′-strengthened superalloys. Materials Science and Engineering: A, 429 (1-2): 277-286, 2006.
- A. J. Ardell. Precipitation hardening. Metallurgical and Materials Transactions A, 16: 2131-2165, 1985. 10.1007/BF02670416.
- A. Kelly and Robin B. Nicholson. Strengthening methods in crystals. Applied science, London, 1971.
- A. Deschamps and Y. Brechet. Influence of predeformation and ageing of an alzn-mg alloy–ii. modeling of precipitation kinetics and yield stress. Acta Materialia, 47 (1): 293-305, 1998.
- G. Fribourg, Y. Bréchet, A. Deschamps, and A. Simar. Microstructure-based modelling of isotropic and kinematic strain hardening in a precipitation-hardened aluminium alloy. Acta Materialia, 59 (9): 3621-3635, 2011.
- Donald C. Stouffer and L. Thomas Dame. Inelastic deformation of metals: models, mechanical properties, and metallurgy. Wiley, New York, 1996.
- M. Militzer, W.P. Sun, and J.J. Jonas. Modelling the effect of deformation-induced vacancies on segregation and precipitation. Acta Metallurgica et Materialia, 42 (1): 133-141, 1994.
- P. Haasen and Edward J. Kramer. Materials science and technology: a comprehensive treatment. Vol. 5, Phase transformations in materials. VCH, Weinheim, 1991.
- J.D Boyd and R.B Nicholson. The coarsening behaviour of θ″ and θ′ precipitates in two al-cu alloys. Acta Metallurgica, 19 (12): 1379-1391, 1971.
- Qin bo Wang, Finsy Robert abd Hai-bo Xu, and Xi Li. On the critical radius in generalized ostwald ripening. J Zhejiang Univ Sci B, 6 (8): 705-707, 2005.
- A. Devaux, L. Nazé, R. Molins, A. Pineau, A. Organista, J.Y. Guédou, J.F. Uginet, and P. Héritier. Gamma double prime precipitation kinetic in alloy 718. Materials Science and Engineering: A, 486 (1–2): 117-122, 2008.
- Yvonne C. Fayman. Microstructure characterization and elemental partitioning in a direct-aged superalloy (da718). Materials Science and Engineering, 92: 159-171, 1987.
- Martin Fisk, Joel Andersson, Rickard Du Rietz, Sylvio Haas, and Stephen Hall. Precipitate evolution in the early stages of ageing in in718 using saxs. Accepted for publication in Materials Science and Engineering: A, 2014.
- C. Slama, C. Servant, and G. Cizeron. Aging of the inconel 718 alloy between 500 and 750 d̀c. Journal of Materials Research, 12: 2298-2316, 9 1997.
- Ya fang Han, P. Deb, and M. C. Chaturvedi. Coarsening behaviour of γ″- and γ′-particles in inconel alloy 718. Metal Science, 16: 555-562, 1982.
10.1179/030634582790427118 Google Scholar
- M. Sundararaman, P. Mukhopadhyay, and S. Banerjee. Some aspects of the precipitation of metastable intermetallic phases in inconel 718. Metallurgical Transactions A, 23: 2015-2028, 1992.
- John Goldak, Aditya Chakravarti, and Malcolm Bibby. A new finite element model for welding heat sources. Metallurgical Trans B, 15B: 299-305, 1984.
- Andreas Lundbáck and Lars-Erik Lindgren. Modelling of metal deposition. Finite Elements in Analysis and Design, 47: 1169-1177, 2011.
