Volume 32, Issue 4 pp. 547-549

Analysis of Pacing/Defibrillator Lead Failure Using Device Diagnostics and Pacing Maneuvers

EUGENE H. CHUNG M.D.

EUGENE H. CHUNG M.D.

Lahey Clinic Medical Center, Burlington, Massachusetts

Search for more papers by this author
DAVID CASAVANT M.S.

DAVID CASAVANT M.S.

Medtronic Inc., Minneapolis, Minnesota

Search for more papers by this author
ROY M. JOHN M,D., Ph.D.

ROY M. JOHN M,D., Ph.D.

Lahey Clinic Medical Center, Burlington, Massachusetts

Search for more papers by this author
First published: 23 March 2009
Citations: 12
Address for reprints: Roy M. John, M.D., Ph.D., Director, EP Laboratory, Lahey Clinic Medical Center, 41 Mall Road, Burlington, MA 01805. Fax: 857-307-1944; e-mail: [email protected]

Disclosures: David Casavant is a field clinical engineer for Medtronic Inc.

Abstract

Patients with Medtronic Sprint Fidelis (Medtronic Inc., Minneapolis, MN, USA) lead failures present with oversensing, resulting in pacing inhibition and inappropriate shocks. We present a case of lead noise from the right ventricular (RV) ring conductor, resulting in multiple inappropriate shocks with subsequent pacing inhibition and syncope. RV pacing lead impedance at no point exceeded 1,000 ohms. We found that increased noise and oversensing was more likely to be induced when pacing at higher pulse widths. RV pacing outputs at lower pulse widths may decrease susceptibility to noise generation and prove an effective temporizing measure in pacing-dependent patients.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.