Volume 3, Issue 11 1900287
Full Paper

Ascorbic Acid-Assisted Stabilization of α-Phase CsPbI3 Perovskite for Efficient and Stable Photovoltaic Devices

Yanqiang Hu

Yanqiang Hu

College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, 210094 P. R. China

School of Physics and Photoelectronic Engineering, Ludong University, Yantai, 264025 Shandong Province, P. R. China

Search for more papers by this author
Qinfeng Xu

Qinfeng Xu

School of Physics and Photoelectronic Engineering, Ludong University, Yantai, 264025 Shandong Province, P. R. China

Search for more papers by this author
Wei Ruan

Wei Ruan

College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, 210094 P. R. China

School of Physics and Photoelectronic Engineering, Ludong University, Yantai, 264025 Shandong Province, P. R. China

Search for more papers by this author
Shufang Zhang

Corresponding Author

Shufang Zhang

College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, 210094 P. R. China

School of Physics and Photoelectronic Engineering, Ludong University, Yantai, 264025 Shandong Province, P. R. China

Search for more papers by this author
Chuanlu Yang

Chuanlu Yang

School of Physics and Photoelectronic Engineering, Ludong University, Yantai, 264025 Shandong Province, P. R. China

Search for more papers by this author
Zhong Yan

Corresponding Author

Zhong Yan

College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, 210094 P. R. China

Search for more papers by this author
Feng Xu

Corresponding Author

Feng Xu

College of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, 210094 P. R. China

Search for more papers by this author
First published: 26 July 2019
Citations: 27

Abstract

The all-inorganic α-CsPbI3 perovskite with superb thermal stability and suitable band gap for light harvesting has been considered as a promising candidate for efficient perovskite solar cells (PSCs). However, the photoactive black α-CsPbI3 is thermodynamically unstable and transforms spontaneously into nonphotoactive yellow δ-phase at room temperature. Herein, a facile method is reported to prepare α-CsPbI3 perovskite films with high stability at room temperature by mixing a small amount of ascorbic acid (AA) in the CsPbI3 precursor solutions. It is revealed that the interaction of AA with the CsPbI3 precursors could effectively inhibit the rapid crystallization of CsPbI3 and reduce the size of the coordination colloidal, and thus decrease the grain size of CsPbI3 for preparing long-term stable α-CsPbI3 films. The PSCs based on the AA-stabilized CsPbI3 films exhibit reproducible photovoltaic performance with a champion efficiency of up to 11.44% and stable output of 11.30%, along with excellent stability, retaining more than 76% of its initial efficiency after aging in ambient conditions for 250 h without encapsulation. Most importantly, such low-cost, solution-processable inorganic PSCs with high performance also show promising potential for large-scale preparation.

Conflict of Interest

The authors declare no conflict of interest.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.