Volume 38, Issue 4 pp. 591-603
Full Paper
Full Access

Simultaneous acquisition of spatial harmonics (SMASH): Fast imaging with radiofrequency coil arrays

Daniel K. Sodickson Md, Ph. D.

Corresponding Author

Daniel K. Sodickson Md, Ph. D.

Charles A. Dana Research Institute and the Harvard-Thorndike Laboratory of the Department of Medicine, Cardiovascular Division, Beth Israel Deaconess Medical Center and Harvard Medical School, Boston, Massachusetts

Cardiovascular Division, Beth Israel Deaconess Medical Center, 330 Brookline Avenue, Boston, MA 02215===Search for more papers by this author
Warren J. Manning

Warren J. Manning

Charles A. Dana Research Institute and the Harvard-Thorndike Laboratory of the Department of Medicine, Cardiovascular Division, Beth Israel Deaconess Medical Center and Harvard Medical School, Boston, Massachusetts

Department of Radiology, Beth Israel Deaconess Medical Center and Harvard Medical School, Boston, Massachusetts

Search for more papers by this author
First published: 12 December 2005
Citations: 1,979

Abstract

SiMultaneous Acquisition of Spatial Harmonics (SMASH) is a new fast-imaging technique that increases MR image acquisition speed by an integer factor over existing fast-imaging methods, without significant sacrifices in spatial resolution or signal-to-noise ratio. Image acquisition time is reduced by exploiting spatial information inherent in the geometry of a surface coil array to substitute for some of the phase encoding usually produced by magnetic field gradients. This allows for partially parallel image acquisitions using many of the existing fast-imaging sequences. Unlike the data combination algorithms of prior proposals for parallel imaging, SMASH reconstruction involves a small set of MR signal combinations prior to Fourier transformation, which can be advantageous for artifact handling and practical implementation. A twofold savings in image acquisition time is demonstrated here using commercial phased array coils on two different MR-imaging systems. Larger time savings factors can be expected for appropriate coil designs.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.