Volume 49, Issue 10 pp. 2489-2492

A 16-GHz CMOS differential Colpitts VCO for DS-UWB and 60-GHz direct-conversion receiver applications

C.-C. Lee

C.-C. Lee

Institute of Computer and Communication, Department of Electrical Engineering National Cheng Kung University, Tainan, Taiwan, Republic of China

Search for more papers by this author
H.-R. Chuang

Corresponding Author

H.-R. Chuang

Institute of Computer and Communication, Department of Electrical Engineering National Cheng Kung University, Tainan, Taiwan, Republic of China

Institute of Computer and Communication, Department of Electrical Engineering National Cheng Kung University, Tainan, Taiwan, Republic of ChinaSearch for more papers by this author
C.-L. Lu

C.-L. Lu

Department of Computer and Communication, Kun Shan University, Tainan, Taiwan, Republic of China

Search for more papers by this author
First published: 27 July 2007
Citations: 5

Abstract

A 16-GHz CMOS differential Colpitts VCO fabricated with the 0.18 μm 1P6M process is presented. The 16-GHz VCO is a good choice for the local oscillator (LO) circuit of the UWB or 60-GHz WPAN direct conversion receiver. The VCO is composed of a PMOS transistor-pair core circuit and two source follower output buffers. The VCO can operate at 16.5 GHz, and the measured phase noise at 1-MHz offset is −115 dBc/Hz. The power consumption of the VCO core is 12.6 mW. Compared with previous reported works, this VCO has an output power of −0.9 dBm and about 800-mV output peak-to-peak voltage swing of the VCO core at 16.5 GHz. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 2489–2492, 2007; Published online in Wiley InterScience (www.interscience.wiley.com) DOI 10.1002/mop.22742

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.