Volume 48, Issue 6 pp. 1148-1151

Electromagnetic scattering from cylinder described by high-order inhomogeneous impedance boundary conditions

Necmi Serkan Tezel

Necmi Serkan Tezel

Istanbul Technical University, Electronics and Communication Engineering Department, 34469, Maslak, Istanbul, Turkey

Search for more papers by this author
Selçuk Paker

Selçuk Paker

Istanbul Technical University, Electronics and Communication Engineering Department, 34469, Maslak, Istanbul, Turkey

Search for more papers by this author
First published: 12 April 2006
Citations: 5

Abstract

In this study, the electromagnetic scattering from a high-order inhomogeneous impedance cylinder is investigated. The method presented in this paper is based on the series representation of incident and scattering fields. The inhomogeneous-surface impedance functions are also expressed by terms of Fourier series. By using the boundary condition on the surface of the cylinder, a series equation is obtained. This equation is reduced the matrix equation by using the orthogonal properties of the Fourier expansion functions and unknown mode coefficients can be calculated. The obtained results are compared with those obtained using the method of moments (MoM) for 1st-order inhomogeneous-surface impedance cylinder and good agreements are observed. © 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 1148–1151, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21565

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.