Volume 12, Issue 5 pp. 491-498
Topics

Soil conditioning in EPB shield tunnelling – An overview of laboratory tests

Prof. Daniele Peila

Prof. Daniele Peila

Politecnico di Torino, DIATI, Corso Duca degli Abruzzi 24, 10129 Torino, Italy

Search for more papers by this author
Dr. Daniele Martinelli

Dr. Daniele Martinelli

Politecnico di Torino, DIATI, Corso Duca degli Abruzzi 24, 10129 Torino, Italy

Search for more papers by this author
Carmine Todaro

Carmine Todaro

Politecnico di Torino, DIATI, Corso Duca degli Abruzzi 24, 10129 Torino, Italy

Search for more papers by this author
Dr. Andrea Luciani

Corresponding Author

Dr. Andrea Luciani

Politecnico di Torino, DIATI, Corso Duca degli Abruzzi 24, 10129 Torino, Italy

Correspondence: >Dr. Andrea Luciani, Politecnico di Torino, DIATI, Corso Duca degli Abruzzi 24, 10129 Torino, ItalySearch for more papers by this author
First published: 01 October 2019
Citations: 31

Abstract

The application of full-face mechanized tunnelling, mainly with EPB shielded machines, has widely increased in the last years and today it can be considered the key technology when tunnelling in soils above and below the water table. The applicability range of EPB machines has widened thanks on one side to the technological and mechanical progresses and on the other side to the quality and effectiveness of the conditioning products. No recognized standards are available for laboratory testing of conditioned soil and each research centre has developed its own procedures and methods. In this paper, an overview of the most frequently used procedures is presented and discussed briefly.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.