Volume 6, Issue 4 pp. 323-331
Article
Full Access

The potential for heat pumps in drying and dehumidification systems II: An experimental assessment of the heat pump characteristics of a heat pump dehumidification system using R114

K. W. Tai

K. W. Tai

Department of Chemical Engineering, The University of Salford, Salford, England

Search for more papers by this author
R. Zylla

R. Zylla

Department of Chemical Engineering, The University of Salford, Salford, England

Search for more papers by this author
S. Devotta

S. Devotta

Department of Chemical Engineering, The University of Salford, Salford, England

Search for more papers by this author
P. J. Diggory

P. J. Diggory

Department of Chemical Engineering, The University of Salford, Salford, England

Search for more papers by this author
F. A. Watson

F. A. Watson

Department of Chemical Engineering, The University of Salford, Salford, England

Search for more papers by this author
F. A. Holland

F. A. Holland

Department of Chemical Engineering, The University of Salford, Salford, England

Search for more papers by this author
First published: 1982
Citations: 21

Abstract

An experimental heat pump dehumidifier is described. Actual coefficients of performance (COP)A are plotted against the gross temperature lift (TCO - TEV) for various bypass ratios and air velocities. Interpolated values of (COP)A for a specified temperature lift were obtained by fitting each set for various dry bulb temperatures of air leaving the humidifier using a linear equation. These values of (COP)A are plotted against the linear velocity of the air stream approaching the evaporator at different dry bulb temperatures. The curves show a maximum of (COP)A at approach velocities in the region of 1·6 ms−1.

The full text of this article hosted at iucr.org is unavailable due to technical difficulties.