Considerations for Homogenizing Alloys
Paul D. Jablonski,
Jeffrey A. Hawk,
Paul D. Jablonski
National Energy Technology Laboratory, 1450 Queen Avenue SW, Albany, OR 97321 United States
Search for more papers by this authorJeffrey A. Hawk
National Energy Technology Laboratory, 1450 Queen Avenue SW, Albany, OR 97321 United States
Search for more papers by this authorPaul D. Jablonski,
Jeffrey A. Hawk,
Paul D. Jablonski
National Energy Technology Laboratory, 1450 Queen Avenue SW, Albany, OR 97321 United States
Search for more papers by this authorJeffrey A. Hawk
National Energy Technology Laboratory, 1450 Queen Avenue SW, Albany, OR 97321 United States
Search for more papers by this authorBook Editor(s):Eric Ott, Anthony Banik,
Joel Andersson,
Ian Dempster,
Tim Gabb, Jon Groh, Karl Heck, Randy Helmink,
Xingbo Liu,
Agnieszka Wusatowska-Sarnek,
Anthony Banik
Search for more papers by this authorJoel Andersson
Search for more papers by this authorIan Dempster
Search for more papers by this authorRandy Helmink
Search for more papers by this authorXingbo Liu
Search for more papers by this authorAgnieszka Wusatowska-Sarnek
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Background
-
Experimental Details
-
Results
-
Discussion
-
Conclusions
-
Acknowledgments
-
Disclaimer
References
- G.L. Erickson, “ The Development and Application of CMSX-10,” Superalloys, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathan, T.M. Pollock and D.A. Woodford, Eds. (Warrendale, PA: TMS, 1996) 35–44.
- E.C. Caldwell, F.J. Fela and G.E. Fuchs, “ Segregation of Elements in High Refractory Content Single Crystal Nickel Based Superalloys,” Superalloys, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra and S. Walston, Eds. (Warrendale, PA: TMS, 2004) 811–818.
- S.R. Hedge, R.M. Kearsey and J.C. Beddoes, “Designing Homogenization-Solution Heat Treatments for Single Crystal Superalloys,” Mater. Sci. Eng. A, 527 (2010) 558-5538.
- W.S. Walston, J.C. Schaeffer and W.H. Murphy, “ A New Type of Microstructural Instability in Superalloys-SRZ,” Superalloys, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathan, T.M. Pollock and D.A. Woodford, Eds. (Warrendale, PA: TMS, 1996) 9–18.
- C.J. Burton, “ Differential Thermal Analysis and the Mechanisms of Minor Additions in Superalloys,” Superalloys, D.R. Muzyka, W.H. Counts, G.E. Waseilewsky, B.H. Kear, J.P. Stroup, R.L. Dreshfield and H. Morrow, Eds. (Warrendale, PA: TMS, 1976) 147-157.
- D.L. Sponseller, “ Differential Thermal Analysis of Nickel-Base Superalloys,” Superalloys, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathan, T.M. Pollock and D.A. Woodford, Eds. (Warrendale, PA: TMS, 1996) 259-266.
- G.E. Fuchs, “Solution Heat Treatment Response of a Third Generation Single Crystal Ni-base Superalloy,” Mater. Sci. Eng. A, 300 (2001) 52-60.
- S.A. Sajjadi, S.M. Zebarjid, R.I.L. Guthrie and M. Isac, “Microstructure Evolution of High-Performance Ni-base Superalloy GTD-111 with Heat Treatment Parameters,” J. Mater. Process. Technol., 175 (2006) 376-381.
- J.W. Martin, R.D. Doherty and B. Cantor, Stability of Microstructure in Metallic Systems, 2ndEd. (Cambridge, UK: Cambridge University Press, 1997)28.
10.1017/CBO9780511623134 Google Scholar
- D.A. Porter and K.E. Easterling, Phase Transformation in Metals and Alloys (New York, NY: Van Nostrand Reinhold Co., 1981) 215.
- P.G. Shewmon, Recrystallization, Grain Growth and Textures (Metals Park, OH: Chapman and Hall, 1966) 165.
- G.R. Purdy and J.S. Kirkaldy, “Homogenization by Diffusion,” Metall. Trans., 2 (1971) 371-378.
- J.W. Martin, R.D. Doherty and B. Cantor, Stability of Microstructure in Metallic Systems, 2ndEd. (Cambridge, UK: Cambridge University Press, 1997)41.
10.1017/CBO9780511623134 Google Scholar
- R.G. Ward, “Effect of Annealing on the Dendritic Segregation of Manganese in Steel,” J. Iron Steel Inst., 203 (1965) 930-932.
- F. Weinberg and R.K. Buhr, “Homogenization of a Low-Alloy Steel,” J. Iron Steel Inst., 207 (1969) 1114-1121.
- F.C. Quigley and P.J. Ahearn, “ Homogenization of High-Strength Steel at 2500F,” No. AMRA-TR-64-42 (Watertown, MA: Army Materials Research Agency, 1964).
- J.W. Martin, R.D. Doherty and B. Cantor, Stability of Microstructure inMetallic Systems, 2ndEd. (Cambridge, UK: Cambridge University Press, 1997) 43.
10.1017/CBO9780511623134 Google Scholar
- J.W. Martin, R.D. Doherty and B. Cantor, Stability of Microstructure inMetallic Systems, 2ndEd. (Cambridge, UK: Cambridge University Press, 1997) 46–47.
10.1017/CBO9780511623134 Google Scholar
- A. Kohn and J. Doumerc, Memoires Scientifiques de la Revue de Metallurgie, 53 (1955) 249.
- R.W. Heckel and M. Balasubramanian, “The Effects of Heat Treatment and Deformation on the Homogenization of Compacts of Blended Powders,” Metall. Trans., 2 (1971) 379-391.
- THERMOCALC, Version 3.1 (Stockholm, Sweden: Royal Institute of Technology, 2013).
- DICTRA, Version 27 (Stockholm, Sweden: Royal Institute of Technology, 2008).
- Ni-DATA, Version 27 (Surrey Technology Centre, UK: Sente Software Ltd., 2005).
- E. Scheil, “Bemerkungen zur schichtkristallbildung,” Z. Metallkd., 34 (1942) 70-72 (in German).
- G.H. Gulliver, “The Quantitative Effect of Rapid Cooling Upon the Constitution of Binary Alloys,” J. Inst. Met., 9 (1913) 120-57.
- P.D. Jablonski, J.A. Hawk, C.J. Cowen and P.J. Maziasz, “ Processing of Advanced Alloys for A-USC Steam Turbine Applications,” Proc. 6th International Conference on Advances in Materials Technology for Fossil Power Plants, D. Gandy, J.P. Shingledecker and R. Viswanathan, Eds. (Palo Alto, CA: Electric Power Research Institute, 2010) 872-885.
- P.D. Jablonski, J.A. Hawk, C.J. Cowen and P.J. Maziasz, “Processing of Advanced Cast Alloys for A-USC Steam Turbine Applications,” Journal of Metals, 64 (2012) 271-279.
