Measurement of Hydrogen Embrittlement Resistance of Alloys 718 and Custom Age 625 Plus® Using the Rising Step Load Technique
Samuel J. Kernion,
John H. Magee,
Thomas N. Werley,
Paul B. Maxwell,
Brian P. Somerday,
Samuel J. Kernion
Carpenter Technology Corporation; 101 W. Bern St.; Reading, PA 19601, USA
Search for more papers by this authorJohn H. Magee
Carpenter Technology Corporation; 101 W. Bern St.; Reading, PA 19601, USA
Search for more papers by this authorThomas N. Werley
Carpenter Technology Corporation; 101 W. Bern St.; Reading, PA 19601, USA
Search for more papers by this authorPaul B. Maxwell
Carpenter Technology Corporation; 101 W. Bern St.; Reading, PA 19601, USA
Search for more papers by this authorBrian P. Somerday
Sandia National Laboratories; Livermore, CA 94551, USA
Search for more papers by this authorSamuel J. Kernion,
John H. Magee,
Thomas N. Werley,
Paul B. Maxwell,
Brian P. Somerday,
Samuel J. Kernion
Carpenter Technology Corporation; 101 W. Bern St.; Reading, PA 19601, USA
Search for more papers by this authorJohn H. Magee
Carpenter Technology Corporation; 101 W. Bern St.; Reading, PA 19601, USA
Search for more papers by this authorThomas N. Werley
Carpenter Technology Corporation; 101 W. Bern St.; Reading, PA 19601, USA
Search for more papers by this authorPaul B. Maxwell
Carpenter Technology Corporation; 101 W. Bern St.; Reading, PA 19601, USA
Search for more papers by this authorBrian P. Somerday
Sandia National Laboratories; Livermore, CA 94551, USA
Search for more papers by this authorBook Editor(s):Eric Ott, Anthony Banik,
Joel Andersson,
Ian Dempster,
Tim Gabb, Jon Groh, Karl Heck, Randy Helmink,
Xingbo Liu,
Agnieszka Wusatowska-Sarnek,
Anthony Banik
Search for more papers by this authorJoel Andersson
Search for more papers by this authorIan Dempster
Search for more papers by this authorRandy Helmink
Search for more papers by this authorXingbo Liu
Search for more papers by this authorAgnieszka Wusatowska-Sarnek
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
The Rising Step Load Method
-
Experimental Procedure
-
Results
-
Conclusions
References
- J. Moreno-Trejo and T. Markeset, “Identifying Challenges in the Maintenance of Subsea Petroleum Production Systems,” Adv. Prod. Manag. Syst., Vol. 384, pp. 251-259, 2012.
- B. Craig, “ Materials for Deep Oil and Gas Well Construction,” Adv. Mater. Process., pp. 33–35, 2008.
- T. Cassagne, M. Bonis, D. Hillis, and C. Duret, “Understanding Field Failures of Alloy 718 Forging Materials in HP / HT wells,” in EuroCorr 2008, EFC, 2008, pp. 1–13.
- S. Mannan, “Alloy 718 for oilfield applications,” Journal of Metals, Vol. 64, pp. 265-270, 2012.
- R. Walter and W. Chandler, “ Influence of Gaseous Hydrogen on Metals: Final Report (NASA CR-124410),” 1973.
- L. Fournier, D. Delafosse, and T. Magnin, “Cathodic hydrogen embrittlement in alloy 718,” Mater. Sci. Eng. A, Vol. 269, No. 1-2, pp. 111–119, 1999.
- P. D. Hicks and C. J. Altstetter, “Hydrogen-Enhanced Cracking of Superalloys,” Metall. Trans. A, Vol. 23, pp. 237-249, 1992.
- L. Liu, K. Tanaka, A. Hirose, and K. F. Kobayashi, “Effects of precipitation phases on the hydrogen embrittlement sensitivity of Inconel 718,” Sci. Technol. Adv. Mater., Vol. 3, No. 4, pp. 335-344, Dec. 2002.
- J. A. Lillard, R. G. Kelly, and R. P. Gangloff, “ Effect of electrode Potential on Stress Corrosion Cracking and Crack Chemistry of a Nickel-Base Superalloy,” in Corrosion 97, 1998, no. 197, pp. 197/1–197/26.
- F. Galliano, B. Ter-Ovanessian, E. Andrieu, J.-M. Cloue, C. Baret-Blanc, and G. Odemer, “On the Influence of Temperature on Hydrogen Embritllement Susceptibility of Alloy 718,” in Superalloy 718 and Derivatives, 2010, pp. 933–945.
- C. San Marchi and B. P. Somerday, “ Technical Reference on Hydrogen Compatibility of Materials (SAND2008-1163),” 2008.
- S. Bechtle, M. Kumar, B. P. Somerday, M. E. Launey, and R. O. Ritchie, “Grain-boundary engineering markedly reduces susceptibility to intergranular hydrogen embrittlement in metallic materials,” Acta Mater., Vol. 57, No. 14, pp. 4148-4157. 2009.
- D. M. Symons, “A comparison of internal hydrogen embrittlement and hydrogen environment embrittlement of X-750,” Eng. Fract. Meck., Vol. 68, No. 6, pp. 751-771, 2001.
- D. Symons, G. Young, and J. Scully, “The effect of strain on the trapping of hydrogen at grain-boundary carbides in Ni-Cr-Fe alloys,” Metall. Mater. Trans. A, Vol. 32, No. 2, pp. 369-377, 2001.
- ASTM Standard E1681, “ Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials,” 2014.
- NACE Standard TM0177, “ Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments,” 2005.
- ASTM Standard F1624, “ Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by Incremental Step Loading Technique,” 2007.
- D. E. Wert and T. N. Werley, “ Comparison of Stress Corrosion Cracking and Hydrogen Embrittlement Resistance of High Strength Aerospace Alloys,” TMS 2010 Conference, Seattle, USA, February, 2010.
- P. Tyler, M. Levy, and L. Raymond, “Investigation of the conditions for crack propagation and arrest under cathodic polarization by rising step load bend testing,” Corrosion, Vol. 47, pp. 82-87, 1991.
- R. P. Gangloff, “ Diffusion Control of Hydrogen Environment Embrittlement in High Strength Alloys,” in in Hydrogen effects on material behavior and corrosion deformation interactions, N. R. Moody, A. W. Thompson, R. Ricker, G. Was, and R. Jones, Eds. Jackson Hole, Wyoming, 2003, pp. 477–497.
