Development of Prior Particle Boundary Free Hot-Isostatic-Pressing Process for Inconel 718 Powder
Litao Chang,
Wenru Sun,
Yuyou Cui,
Rui Yang,
Litao Chang
Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 10016, P.R. China
Search for more papers by this authorWenru Sun
Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 10016, P.R. China
Search for more papers by this authorYuyou Cui
Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 10016, P.R. China
Search for more papers by this authorRui Yang
Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 10016, P.R. China
Search for more papers by this authorLitao Chang,
Wenru Sun,
Yuyou Cui,
Rui Yang,
Litao Chang
Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 10016, P.R. China
Search for more papers by this authorWenru Sun
Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 10016, P.R. China
Search for more papers by this authorYuyou Cui
Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 10016, P.R. China
Search for more papers by this authorRui Yang
Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 10016, P.R. China
Search for more papers by this authorBook Editor(s):Eric Ott, Anthony Banik,
Joel Andersson,
Ian Dempster,
Tim Gabb, Jon Groh, Karl Heck, Randy Helmink,
Xingbo Liu,
Agnieszka Wusatowska-Sarnek,
Anthony Banik
Search for more papers by this authorJoel Andersson
Search for more papers by this authorIan Dempster
Search for more papers by this authorRandy Helmink
Search for more papers by this authorXingbo Liu
Search for more papers by this authorAgnieszka Wusatowska-Sarnek
Search for more papers by this authorSummary
This chapter contains sections titled:
-
Introduction
-
Material and Experiment
-
Results and Discussion
-
Conclusion
References
- A. Kracke, “ Superalloys, the most successful alloy system of modern times-past, present and future” (Paper presented at The 7th Symposium on Superalloy 718 and Derivatives Pittsburgh, Pennsylvania, 2010), 13-50
- G. Sjöberg, “ Casting superalloys for structural applications” (Paper presented at The 7th Symposium on Superalloy 718 and Derivatives Pittsburgh, PA, 2010), 117-130
- G.A. Rao, et al., “Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy inconel 718”, Mater. Sci. Eng. A, 355 (2003), 114-125
- D.F. Paulonis, j.J. Schirra, “ Alloy 718 at pratt&whitney- histrorical perpective and future challenges” (Paper presented at Fifth International Symposium on Superalloys 718, 625, 706 and Various Derivatives, Pittsburgh, PA, 2001), 13-23
- R.G. Carlson, J.F. Radavich, “ Microstructural characterization of cast 718” (Paper presented at Superalloy 718-Metallurgy and Applications, 1989), 79-95
- K. Zhang, et al., “Effect of hot isostatic pressing parameters on the microstructure and properties of powder Ti-6A1-4V hot-isostatically-pressed damples”, Metall. Mater. Trans. A, 41 (2010), 1033-1045
- B. Ye, et al., “Enhanced densification of Ti-6A1-4V powders by transformation-mismatch plasticity”, Acta Mater, 58 (2010), 3851-3859
- G. Raisson, “Evolution of PM nickel base superalloy processes and products”, Powder Metall, 51 (2008), 10-13
- C. Bampton, et al., “ Net-shape HIP powder metallurgy components for rocket engines” (Paper presented at International Conference on Hot Isostatic Pressing, 05, Paris, France, 2005), 1-10
- G.A. Rao, et al., “Influence of modified processing on structure and properties of hot isostatically pressed superalloy Inconel 718”, Mater. Sci. Eng. A, 418 (2006), 282-291
- U. Habel, “ Microstructure and mechanical properties of HIP PM 718” (Paper presented at Fifth International Symposium on Superalloys 718, 625, 706 and Various Derivatives, 2001), 593-604
- G.A. Rao, et al., “Characterisation of hot isostatically pressed nickel base superalloy Inconel☆ 718”, Mater. Sci. Technol, 19 (2003), 313-321
- T. Prakash, et al., “Microstructures and mechanical properties of hot isostatically pressed powder metallurgy Alloy APK-1”, Metall. Trans. A, 14 (1983), 733-742
- C.L. Qiu, et al., “Influence of hot isostatic pressing temperature on microstructure and tensile properties of a nickel-based superalloy powder”, Mater. Sci. Eng. A, 564 (2013), 176-185
- L. Chang, et al., “Influences of hot-isostatic-pressing temperature on microstructure, tensile properties and tensile fracture mode of Inconel 718 powder compact”, Mater. Sci. Eng. A, 599 (2014), 186-195
- L. Chang, et al., “Effect of heat treatment on microstructure and mechanical properties of the hot-isostatic-pressed Inconel 718 powder compact”, J. Alloys Compd., 590 (2014), 227-232
- L. Chang, et al.; China Patent Application CN 103551573 A, 2013
- L. Chang, Ph.D Dissertation, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China, 2014
- T. Antonsson, H. Fredriksson, “The effect of cooling rate on the solidification of Inconel 718”, Metall. Mater. Trans. B, 36 (2005), 85-96
- Y.C. Fayman, “Microstructural characterization and elemental partitioning in a direct-aged superalloy (DA 718)”, Mater. Sci. Eng., 92 (1987), 159-171
- J.R. Li, et al., Adanced high temperature structural material and technology, (Beijing, National defence industry press, 2012), 130
- E. Arzt, et al., “Practical applications of hotisostatic pressing diagrams: Four case studies”, Metall. Trans. A, 14 (1983), 211-221
- W.R. Sun, et al., “Effects of phosphorus on the d-Ni3Nb phase precipitation and the stress rupture properties in alloy 718”, Mater. Sci. Eng. A, 247 (1998), 173-179
