Influence of Deformed Surface Layer When Machining Wrought Alloy 718 in an Annealed and in a Pre‐Strained Condition - 8th International Symposium on Superalloy 718 and Derivatives - Wiley Online Library

Sims, C.T., N.S. Stoloff, and W.C. Hagel, Superalloys II (New York: Wiley, 1987).
Google Scholar
Ezugwu, E.O., Z.M. Wang, and A.R. Machado, “The machinability of nickel-based alloys: A review”, Journal of Materials Processing Technology, 1999. 86 (1-3): p. 1-16.
10.1016/S0924-0136(98)00314-8
Web of Science® Google Scholar
Devillez, A., et al., “Dry machining of Inconel 718, workpiece surface integrity,” Journal of Materials Processing Technology, 2011. 211(10): p. 1590-1598.
10.1016/j.jmatprotec.2011.04.011
CAS Web of Science® Google Scholar
Pawade, R.S., S.S. Joshi, and P.K. Brahmankar, “Effect of machining parameters and cutting edge geometry on surface integrity of high-speed turned Inconel 718”. International Journal of Machine Tools and Manufacture, 2008. 48(1): p. 15-28.
10.1016/j.ijmachtools.2007.08.004
Web of Science® Google Scholar
Zhuang, K., et al., “Notch wear prediction model in turning of Inconel 718 with ceramic tools considering the influence of work hardened layer,” Wear, 2014. 313 (1–2): p. 63-74.
10.1016/j.wear.2014.02.007
CAS Web of Science® Google Scholar
Shaw, M.C., A.L. Thurman, and H.J. Ahlgren, “A Plasticity Problem Involving Plane Strain and Plane Stress Simultaneously: Groove Formation in the Machining of High Temperature Alloys,” Transactions of the ASME, 1966 (May): p. 142-146.
Google Scholar
Komanduri, R. and T.A. Schroeder, “On Shear Instability in Machining a Nickel-Iron Base Superalloy,” Journal of Engineering for Industry, 1986. 108(2): p. 93-100.
10.1115/1.3187056
Web of Science® Google Scholar
Komanduri, R. and Z.B. Hou, “On thermoplastic shear instability in the machining of a titanium alloy (Ti-6A1-4V),” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2002. 33(9): p. 2995-3010.
10.1007/s11661-002-0284-1
Web of Science® Google Scholar
Cedergren, S., et al., “The effects of grain size and feed rate on notch wear and burr formation in wrought Alloy 718,” The International Journal of Advanced Manufacturing Technology, 2012: p. 1-7.
Google Scholar
Xue, Q., et al., “EBSD characterization of dynamic shear band regions in pre-shocked and as- received 304 stainless steels,” Materials Science and Engineering: A, 2008. 473 (1-2): p. 279-289.
10.1016/j.msea.2007.04.048
CAS Web of Science® Google Scholar
Guo, Y.B., “An integral method to determine the mechanical behavior of materials in metal cutting,” Journal of Materials Processing Technology, 2003. 142(1): p. 72-81.
10.1016/S0924-0136(03)00462-X
CAS Web of Science® Google Scholar
Guo, Y., R. M'Saoubi, and S. Chandrasekar, “Control of deformation levels on machined surfaces,” CIRP Annals - Manufacturing Technology. 60(1): p. 137-140.
Google Scholar
Guo, Y., et al., “ Deformation and microstructure in machining,” Advanced Materials Research. 2011. p. 325-331.
Google Scholar

8th International Symposium on Superalloy 718 and Derivatives

Influence of Deformed Surface Layer When Machining Wrought Alloy 718 in an Annealed and in a Pre-Strained Condition

Summary

References

References

Information

About Wiley Online Library

Help & Support

Opportunities

Connect with Wiley

Influence of Deformed Surface Layer When Machining Wrought Alloy 718 in an Annealed and in a Pre-Strained Condition

Summary

References

References

Related

Information