Study of Thermal Damage Introduced by Laser Cladding Process Part 1. Existence Verification by Experiment

Chao Zeng

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and, Astronautics; 29 Yudao St.; Nanjing, 210016, China

Search for more papers by this author

Wei Tian,

Wei Tian

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and, Astronautics; 29 Yudao St.; Nanjing, 210016, China

Search for more papers by this author

Wen-He Liao,

Wen-He Liao

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and, Astronautics; 29 Yudao St.; Nanjing, 210016, China

Nanjing University of Science and Technology; 200 Xiaolingwei St.; Nanjing, 210094, China

Search for more papers by this author

Liang Hua,

Liang Hua

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and, Astronautics; 29 Yudao St.; Nanjing, 210016, China

Nanjing Institute of Railway Technology; 65 Pearl South Rd; Nanjing, 210031, China

Search for more papers by this author

Chao Zeng,

Chao Zeng

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and, Astronautics; 29 Yudao St.; Nanjing, 210016, China

Search for more papers by this author

Wei Tian,

Wei Tian

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and, Astronautics; 29 Yudao St.; Nanjing, 210016, China

Search for more papers by this author

Wen-He Liao,

Wen-He Liao

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and, Astronautics; 29 Yudao St.; Nanjing, 210016, China

Nanjing University of Science and Technology; 200 Xiaolingwei St.; Nanjing, 210094, China

Search for more papers by this author

Liang Hua,

Liang Hua

College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and, Astronautics; 29 Yudao St.; Nanjing, 210016, China

Nanjing Institute of Railway Technology; 65 Pearl South Rd; Nanjing, 210031, China

Search for more papers by this author

Book Editor(s):Fernand Marquis,

Fernand Marquis

Search for more papers by this author

First published: 16 August 2013

https://doi.org/10.1002/9781118792148.ch297

Summary

This chapter contains sections titled:

Introduction
Experimental Procedure
Results and Discussion
Conclusions

References

F. Bruckner, D. Lepski, and E. Beyer, “Modeling The Influence Of Process Parameters And Additional Heat Sources On Residual Stresses In Laser Cladding,” Journal of Thermal Spray Technology, 16 (3) (2007), 355–373.
10.1007/s11666-007-9026-7
Web of Science® Google Scholar
E.M. Birger et al., “Industrial Laser Cladding: Current State And Future,” Welding International, 25 (3) (2011), 234–243.
10.1080/09507116.2010.540880
Google Scholar
L. Shepeleva et al., “Laser Cladding Of Turbine Blades,” Surface and Coatings Technology, 125 (2000), 45–48.
10.1016/S0257-8972(99)00603-9
CAS Web of Science® Google Scholar
M. Pleterski et al., “Blanking Punch Life Improvement By Laser Cladding,” Engineering Failure Analysis, 18 (2011), 1527–1537.
10.1016/j.engfailanal.2011.05.010
CAS Web of Science® Google Scholar
T. Baldridge et al., “Laser Cladding Of Inconel 690 On Inconel 600 Superalloy For Corrosion Protection In Nuclear Applications,” Optics and Lasers in Engineering, 51 (2013), 180–184.
10.1016/j.optlaseng.2012.08.006
Web of Science® Google Scholar
J. Lambarri et al., “Microstructural And Tensile Characterization Of Inconel 718 Laser Coatings For Aeronautic Components,” Optics and Lasers in Engineering, 51 (2013), 813–821.
10.1016/j.optlaseng.2013.01.011
Web of Science® Google Scholar
I. Tabernero et al., “Evaluation Of The Mechanical Properties Of Inconel 718 Components Built By Laser Cladding,” International Journal of Machine Tools and Manufacture, 51 (2011), 465–470.
10.1016/j.ijmachtools.2011.02.003
Web of Science® Google Scholar
P. Bendeich et al., “Residual Stress Measurements In Laser Clad Repaired Low Pressure Turbine Blades For The Power Industry,” Materials Science and Engineering A, 437 (1) (2006), 70–74.
10.1016/j.msea.2006.04.065
CAS Web of Science® Google Scholar
H. Köhler et al., “Residual Stresses in Steel Specimens Induced by Laser Cladding and Their Effect on Fatigue Strength,” Physics Procedia, 39 (2012), 354–361.
10.1016/j.phpro.2012.10.048
CAS Web of Science® Google Scholar
H. Koehler et al., “Influence Of Laser Reconditioning On Fatigue Properties Of Crankshafts,” Physics Procedia, 12 (Part A) (2011), 512–518.
10.1016/j.phpro.2011.03.063
CAS Web of Science® Google Scholar
B. Valsecchi et al., “Characterisation Of The Thermal Damage In A Martensitic Steel Substrate Consequent To Laser Cladding Process,” Procedia Engineering, 10 (2011), 2851–2856.
10.1016/j.proeng.2011.04.474
CAS Web of Science® Google Scholar

PRICM: 8th Pacific Rim International Congress on Advanced Materials and Processing