Iron, 2. Blast Furnace Process
This is not the most recent version, view other versions
This version
Iron, 2. Blast Furnace Process
Iron
Franz Oeters, Manfred Ottow, Dieter Senk, Ali Beyzavi, Jochen Güntner, Hans Bodo Lüngen, Manfred Koltermann, Andreas Buhr, Jun-ichiro Yagi, Lothar Formanek, Fritz Rose, Jürgen Flickenschild, Rolf Hauk, Rolf Steffen, Reiner Skroch, Gernot Mayer-Schwinning, Heinz-Lothar Bünnagel, Hans-Georg Hoff,
Iron
Franz Oeters, Manfred Ottow, Dieter Senk, Heinrich Meiler, Hans Bodo Lüngen, Manfred Koltermann, Andreas Buhr, Jun-ichiro Yagi, Lothar Formanek, Fritz Rose, Jürgen Flickenschild, Rolf Hauk, Rolf Steffen, Reiner Skroch, Gernot Mayer-Schwinning, Heinz-Lothar Bünnagel, Hans-Georg Hoff,
Iron
Franz Oeters, Manfred Ottow, Heinrich Meiler, Hans Bodo Lüngen, Manfred Koltermann, Andreas Buhr, Jun-ichiro Yagi, Lothar Formanek, Fritz Rose, Jürgen Flickenschild, Rolf Hauk, Rolf Steffen, Reiner Skroch, Gernot Mayer-Schwinning, Heinz-Lothar Bünnagel, Hans-Georg Hoff,
Hans Bodo Lüngen, Jun-ichiro Yagi,
Jun-ichiro Yagi
Research Institute of Mineral Dressing and Metallurgy, Tohoku University, Sendai, Japan
Search for more papers by this authorHans Bodo Lüngen, Jun-ichiro Yagi,
Jun-ichiro Yagi
Research Institute of Mineral Dressing and Metallurgy, Tohoku University, Sendai, Japan
Search for more papers by this authorAbstract
The article contains sections titled:
1. |
Blast Furnace Process |
2. |
Outline of a Blast Furnace Construction |
3. |
Metallurgy of the Blast Furnace |
4. |
Effective Utilization of Energy |
5. |
Blast Furnace Productivity Criteria |
6. |
Use of Blast Furnace Products |
7. |
Process Control |
8. |
Hot-Metal Desulfurization |
References
- 1 N. Tokumitsu et al., “Development of Smelting Reduction Process Using an Iron Bath,” Process Technol Conf. Proc. (1982) 99 – 107.
- 2 H. Hille, W. Lanzer, H. B. Lüngen, R. Sieger: “Technical and economical examination of the development of blast furnace capacities,” MPT International 1997, no. 4, 66 – 80.
- 3 European Blast Furnace Committee: Constructional Features of Sinter Plants and Blast Furnaces, VDEh, January 1999.
- 4 K. H. Peters, H. B. Lüngen: “The dependence of the core of a blast furnace on the supply of industrial gases,” European air separation day in Cologne, Germany, October 29, 1992.
- 5 K. Kanbara et al., Trans. Iron Steel Inst. Jpn. 17 (1977) 371 – 380.
- 6 Y. Shimomura et al., Trans. Iron Steel Inst. Jpn. 17 (1977) 381 – 390.
- 7 M. Sasaki et al., Trans. Iron Steel Inst. Jpn. 17 (1977) 391 – 400.
- 8 K. Kojima et al., Trans. Iron Steel Inst. Jpn. 17 (1977) 401 – 409.
- 9
K. Sasaki
et al.,
Tetsu to Hagane,
62
(1976)
580 – 591.
10.2355/tetsutohagane1955.62.5_580 Google Scholar
- 10 H. Bonnekamp, K. Engel, W. Fix, and K. Grebe, Stahl Eisen, 103 (1983) 75 – 82.
- 11 J. J. Bosley, N. B. Melcher, M. M. Harris, J. Met. 12 (1959, Sept.) 610 – 615.
- 12 Verein Deutscher Eisenhüttenleute (ed.): Der Hochofenprozeß: Das kinetisch-dynamische Simulationsmodell des Vereins Deutscher Eisenhüttenleute, Verlag Stahleisen mbH, Düsseldorf 1973.
- 13 H. B. Lüngen, H.-P. Rüther: “Casting practice at German blast furnaces,” Proc. Eur. Blast Committee, Linz, Austria, April 25, 1996.
- 14 Gmelin-Durrer: Metallurgie des Eisen, 4th ed. vols, 2 a, b, Verlag Chemie, Weinheim 1964.
- 15 M. Higuchi, M. Iizuka, T. Shibuya: Developments in Ironmaking Practice, The Iron and Steel Institute, London 1973 p. 98.
- 16 G. Heynert, E. Legille, in (15) , p. 109.
- 17 G. Heynert, K. H. Peters, G. Ringkloff, Stahl Eisen 93 (1973) no. 12, 505 – 517.
- 18 Reference list of Paul Wurth Company, Nov. 1998.
- 19 Iron and Steel Inst. Japan: Handbook of Iron and Steel, vol. 2, Maruzen Publishing Co., Tokyo 1979, p. 295.
- 20 W. Kowalski, H. B. Lüngen, K. P. Stricker: “Blast Furnace Lifetime: State of the Art and Practice for Prolonging Blast furnace Campaigns,” Cokemaking International 11 (1999) no. 2, 20 – 30.
- 21 S. Mochizuki, N. Morishita, M. Higuchi, J. Mijawa: “Ofenreisen und Neuzustellungen des Hochofens 1 des Hüttenwerkes Oita der Nippon Steel Corp.,” Stahl Eisen 116 (1996) no. 12, 83 – 90.
- 22 E. Akimoto et al.: “Short term revamping techniques of blast furnace,” Kawasaki Technical Report no. 29, Nov. 1993, pp. 38 – 44.
- 23 P. Heinrich, H. Hille: “Der Kupferstave — Ein wesentlicher Beitrag zur Wirtschaftlichkeit des Hochofenverfahrens,” Fachausschußbericht Nr. 1.031 des Vereins Deutscher Eisenhüttenleute (VDEh) über die 127. Vollsitzung des Hochofenausschusses, Bericht Nr. 1, Juli 1998.
- 24 B. Held, F. Reinitzhuber, Stahl Eisen 106 (1986) no. 22, 1238 – 1248.
- 25 (19) , p. 306.
- 26 Ullmann, 4th ed., 10, 370.
- 27 M. Manes, J. S. Maikay, J. Metal. 14 (1962) 308 – 314.
- 28 VDEh Blast Furnace Committee 1995.
- 29 R. Jeschar, G. Dombrowski: “Summary evaluation and assessment of carbon and hydrocarbon raw materials for iron ore reduction,” 1998 ICSTI/Ironmaking Conf. Proc., 431 – 441.
- 30 (19), p. 110.
- 31 (19), p. 120.
- 32 M. Nakamura, T. Sugiyama, T. Uno, Y. Hara, S. Kondo Tetsu to Hagane 63 (1977) 28 – 36.
- 33 G. Heynert, P. Ischebeck, W. V. Spee, Stahl Eisen 81 (1961) 1 – 12.
- 34 M. Hatano, K. Kurita, T. Yanaka: Int'l Blast Furnace Hearth and Raceway Symposium, Newcastle AIMM 1981, p. 4.1 – 4.10.
- 35 K. Takeda et al., Proc. Ironmaking Conf. 46 (1987) 191 – 198.
- 36 H. Lackmann: 4. Dozentenseminar des Vereins Deutscher Eisenhüttenleute, Gelsenkirchen 1973.
- 37 (19), pp. 159, 160.
- 38 W. Hartig, K. Langner, H. B. Lüngen, K. P. Stricker: “Measures for increasing the productivity of blast furnaces,” MPT International 1996, no. 4, 42 – 51.
- 39 K. H. Peters, H. Mohnkern, H. B. Lüngen: “Ways and means for low coke blast furnace operation,” Proc. 1st Int. Congr. Sci. Technol. Ironmaking, Sendai 1994, 493 – 499.
- 40 “NKK′s Fukuyama blast furnace sets world record for PCI rate,” Skillings Mining Review, Sept. 19, 1998, p. 6.
- 41 H.-U. Lindenberg et al.: “Rohstoffliches Recycling von Kunststoffen als Reduktionsmittel im Hochofen,” Stahl Eisen 116 (1996) no. 8, 89 – 93.
- 42 K. H. Peters, E. Beppler, B. Korthas, M. Peters: “Effect of high levels of coal injection on blast furnace operating,” Proc. 2nd EIC 1991, 247 – 263.
- 43 Y. Ohno et al., 7th Process tech. Conf. Proceedings, Toronto 1988, pp. 195 – 201.
- 44 (14), vols. 4 a, b.
- 45 (14), vols. 4 a, b.
- 46 H. Schenk, Stahl Eisen, 83 (1963) 1683 – 1690.
- 47 H. Wysocki, Vorlesung Entwerfen von Hüttenwerksanlagen. Techn. Univ. Berlin 1975.
- 48 (19), pp. 278 – 300.
- 49 European Blast Furnace Committee and VDEh Blast Furnace Committee, Data Exchange of Sinter Plants and Blast Furnaces 1997/1998.
- 50 Properties and Effective Uses of Iron and Steel Slag, Nippon Slag Association, Tokyo 1996.
- 51 Jahrbuch Stahl 1999, Verlag Stahleisen mbH, Düsseldorf 1999, p. 229.
- 52 M. Saino: 116th and 117th Nishiyama Memorial Seminar organized by Iron Steel Institute, Japan 1987, pp. 237 – 278.
- 53 Y. Hara, M. Sakawa, S. Kondo, Tetsu to Hagane 62 (1976) 315 – 323.
- 54 Iron and Steel Inst. Japan: Blast Furnace Phenomena and Modeling, Elsevier, London 1987, pp. 121 – 127, pp. 132 – 133.
- 55 W. E. Ranz, Chem. Eng. Prog. 48 (1952) 247 – 253.
- 56 J. Kudoh, J. Yagi, Tetsu to Hagane 73 (1987) 2020 – 2027.
- 57 J. Yagi, I. Muchi, Trans. Iron Steel Inst. Jpn. 10 (1970) 392 – 405.
- 58 M. Hatano, K. Kurita, Tetsu to Hagane 66 (1980) 1898 – 1907.
- 59 M. Kuwabara et al., Proc. Joint Symp. of Iron Steel Inst. Jpn. and Australasian Institute Mining and Metallurgy, Tokyo 1983, pp. 193 – 204.
- 60 S. Taguchi et al., Tetsu to Hagane 68 (1982) 2302 – 2310.
- 61 M. Hatano, K. Kurita, H. Yamaoka, T. Yokoi, Trans. Iron Steel Inst. Jpn. 25 (1985) 933 – 940.
- 62 Y. Okuno et al., Tetsu to Hagane 73 (1987) 91 –98.
- 63 T. Sugiyama, J. Yagi, Y. Omori: Proc. 3rd Int'l Iron Steel Congr., 1978 Chicago, pp. 479 – 488.
- 64 J. Ohno et al., International Blast Furnace Hearth & Raceway Symposium, Newcastle, Australia 1981, pp. 10 – 12.
- 65 A. Poos: Heat and Mass Transfer in Process Metallurgy, A. W. D. Hills, 1967, pp. 1 – 38.
- 66 M. Hatano, K. Kurita, H. Yamaoka, T. Yokoi, in (15), pp. 941 – 948.
- 67 T. Sugiyama et al., Curr. Adv. Mater. Proc. (in Japanese), 1 (1988) 22 – 25.
- 68 J. Yagi, T. Akiyama, Curr. Adv. Mater. Proc. (in Japanese), 2 (1989) 2.
- 69 A. Nakagawa, Tekkokai (1986) no. 6, 5 – 9, issued by The Japan Iron and Steel Federation.
- 70 K. H. Peters, H. B. Lüngen: “Economical hot metal production in the blast furnace as basis for crude steel production in an integrated iron and steel works,” Proc. 6th Int. Iron Steel Congr., 1990, Nagoya, ISIJ, Preprint vol. 5, pp. 302 – 310.
- 71 D. Ameling, H. Baer, H. Bertling, H. B. Lüngen: “Cokemaking Technology 2000 — State-of-the-art-technology and new structures,” MPT International 1998, no. 5, 46 – 56.
- 72 M. Wahlster, H. P. Schulz, J. Thein, Stahl Eisen 89 (1969) 478 – 486.
- 73 (19), p. 450.
- 74 W. Domalski, K. Fabian, D. Nolle, Stahl Eisen 88 (1968) 906 – 919.
- 75 (19), p. 443.
- 76 H. P. Schulz, Stahl Eisen 89 (1969) 249 – 262.
- 77 S. Eketorp, B. Kalling, Giesserei 46 (1959) 905 – 912.
- 78 (19), p. 446.
- 79 H. Kajioka in W. K. Lu (ed.): Symposium on External Desulphurizations of Hot Metal, McMaster Univ., Hamilton, Canada, 1975, p. 15–1 – p. 15–35
- 80 W. Meichsner, K. H. Peters, W. Ullrich, H. Knahl, J. Met. 26 (1974) no. 4, 55 – 58.
- 81 (19), p. 441.
- 82 (19), p. 448.
- 83 H. Nashiwa, S. Yamaguchi, M. Takano, M. Iwami, Sumitomo Kinzoku 27 (1975) 207 – 211.
- 84 W. H. Duquette: Open Hearth Conf. Proc., 56 TMS-AIME, (1973) 79.
- 85 P. F. Potocic, K. G. Leewis, in (77) , pp. 3–1 – p. 3–19.
- 86 W. A. Voronova, Steel USSR 4 (1974) 261.
- 87 L. G. Nelson, Proc. Ironmaking Conf. 34 (1975) 451 – 459.
- 88 P. Koros, R. G. Petrushka, in (83), pp. 7–1 – p. 7–25.
Further Reading
- H. K. D. H. Bhadeshia, R. Honeycombe: Steels. Microstructure and Properties, 3. ed., Elsevier/Butterworth-Heinemann, Amsterdam 2006.
- D. A. Brandt, J. C. Warner: Metallurgy Fundamentals, 5. ed., Goodheart-Willcox, Tinley Park, IL 2009.
-
P. Enghag:
Encyclopedia of the Elements,
Wiley-VCH,
Weinheim
2004.
10.1002/9783527612338 Google Scholar
- G. Krauss: Steels. Processing, Structure, and Performance, ASM International, Materials Park, Ohio 2005.
- J. A. Lepinski, Jeffrey C. Myers, G. H. Geiger: Iron, Kirk Othmer Encyclopedia of Chemical Technology, 5th edition, vol. 14, p. 490–529, John Wiley & Sons, Hoboken, NJ, 2005, online: DOI: 10.1002/0471238961.0918151412051609.a01.pub2 (February 2005).
