Iron, 2. Blast Furnace Process
View previous versions
Iron
Franz Oeters, Manfred Ottow, Dieter Senk, Ali Beyzavi, Jochen Güntner, Hans Bodo Lüngen, Manfred Koltermann, Andreas Buhr, Jun-ichiro Yagi, Lothar Formanek, Fritz Rose, Jürgen Flickenschild, Rolf Hauk, Rolf Steffen, Reiner Skroch, Gernot Mayer-Schwinning, Heinz-Lothar Bünnagel, Hans-Georg Hoff,
Iron
Franz Oeters, Manfred Ottow, Dieter Senk, Heinrich Meiler, Hans Bodo Lüngen, Manfred Koltermann, Andreas Buhr, Jun-ichiro Yagi, Lothar Formanek, Fritz Rose, Jürgen Flickenschild, Rolf Hauk, Rolf Steffen, Reiner Skroch, Gernot Mayer-Schwinning, Heinz-Lothar Bünnagel, Hans-Georg Hoff,
Iron
Franz Oeters, Manfred Ottow, Heinrich Meiler, Hans Bodo Lüngen, Manfred Koltermann, Andreas Buhr, Jun-ichiro Yagi, Lothar Formanek, Fritz Rose, Jürgen Flickenschild, Rolf Hauk, Rolf Steffen, Reiner Skroch, Gernot Mayer-Schwinning, Heinz-Lothar Bünnagel, Hans-Georg Hoff,
Hans Bodo Lüngen, Jun-Ichiro Yagi,
Jun-Ichiro Yagi
Research Institute of Mineral Dressing and Metallurgy, Tohoku University, Sendai, Japan
Search for more papers by this authorHans Bodo Lüngen, Jun-Ichiro Yagi,
Jun-Ichiro Yagi
Research Institute of Mineral Dressing and Metallurgy, Tohoku University, Sendai, Japan
Search for more papers by this authorFirst published: 30 July 2019
Abstract
The article contains sections titled:
| 1 | Introduction |
| 2 | Outline of a Blast Furnace Construction |
| 3 | Metallurgy of the Blast Furnace |
| 4 | Effective Utilization of Energy |
| 5 | Blast Furnace Productivity Criteria |
| 6 | Use of Blast Furnace Products |
| 7 | Process Control |
| 8 | Hot-Metal Desulfurization |
| References |
References
- 1 European Blast Furnace Committee (1999) Constructional Features of Sinter Plants and Blast Furnaces, VDEh January.
- 2Peters, K.H. and Lüngen, H.B. (1992) The Dependence of the Core of a Blast Furnace on the Supply of Industrial Gases, European Air Separation Day in Cologne, Germany, 29 October.
- 3Kanbara, K., et al. (1977) Trans. Iron Steel Inst. Jpn. 17, 371–380.
- 4Shimomura, Y., et al. (1977) Trans. Iron Steel Inst. Jpn. 17, 381–390.
- 5Sasaki, M., et al. (1977) Trans. Iron Steel Inst. Jpn. 17, 391–400.
- 6Kojima, K., et al. (1977) Trans. Iron Steel Inst. Jpn. 17, 401–409.
- 7Sasaki, K., et al. (1976) Tetsu to Hagane 62, 580–591.
10.2355/tetsutohagane1955.62.5_580 Google Scholar
- 8Bonnekamp, H., Engel, K., Fix, W. and Grebe, K. (1983) Stahl Eisen 103, 75–82.
- 9Bosley, J.J., Melcher, N.B. and Harris, M.M. (1959) J. Met. 12, 610–615.
- 10 Verein Deutscher Eisenhüttenleute (ed.) (1973) Der Hochofenprozeß: Das kinetisch-dynamische Simulationsmodell des Vereins Deutscher Eisenhüttenleute, Verlag Stahleisen mbH, Düsseldorf.
- 11Lüngen, H.B. and Rüther, H.-P. (1996) Casting practice at German blast furnaces. Proc. Eur. Blast Committee, Linz, Austria, April 25.
- 12 Gmelin-Durrer (1964) Metallurgie des Eisen, 4th edn, vols. 2a and b, Verlag Chemie, Weinheim.
- 13Higuchi, M., Iizuka, M. and Shibuya, T. (1973) Developments in Ironmaking Practice, The Iron and Steel Institute, London, p. 98.
- 14Heynert, G. and Legille, E. (1973) Developments in Ironmaking Practice, The Iron and Steel Institute, London, p. 109.
- 15Heynert, G., Peters, K.H. and Ringkloff, G. (1973) Stahl Eisen 93 (12), 505–517.
- 16Reference list of Paul Wurth Company, September 2018.
- 17 Iron and Steel Inst (1979) Japan: Handbook of Iron and Steel, vol. 2, Maruzen Publishing Co, Tokyo, p. 295.
- 18Pillmair, G., Schöllhammer, H., Lackner, B. and Irnich, F.-J. (2012) voestalpine Stahl steigert Effizienz der Hochöfen/voestalpine Stahl enhances the efficiency of blast furnaces, Stahl und Eisen 132 (6), 74–79. VDEh Zb 414, DB-Objekt-No. 744273.
- 19Kowalski, W., Lüngen, H.B. and Stricker, K.P. (1999) Blast Furnace Lifetime: State of the Art and Practice for Prolonging Blast furnace Campaigns, Cokemaking Int. 11 (2), 20–30.
- 20Mochizuki, S., Morishita, N., Higuchi, M. and Mijawa, J. (1996) Ofenreisen und Neuzustellungen des Hochofens 1 des Hüttenwerkes Oita der Nippon Steel Corp, Stahl Eisen 116 (12), 83–90.
- 21Akimoto, E., et al. (1993) Short Term Revamping Techniques of Blast Furnace, Kawasaki Technical Report No. 29, November, pp. 38–44.
- 22Heinrich, P. and Hille, H. (1998) Der Kupferstave — Ein wesentlicher Beitrag zur Wirtschaftlichkeit des Hochofenverfahrens, Fachausschußbericht Nr. 1.031 des Vereins Deutscher Eisenhüttenleute (VDEh) über die 127. Vollsitzung des Hochofenausschusses, Bericht Nr. 1, Juli.
- 23Hille, H., Lanzer, W., Lüngen, H.B. and Sieger, R. (1997) Technical and economical examination of the development of blast furnace capacities, MPT Int. (4), 66–80.
- 24Rüther, P. and Peters, M. (2015) Requirements for a Campaign Life of More Than 20 years at Blast Furnace 2 of Thyssenkrupp Steel Europe, ESTAD, 2nd European Steel Technology and Application Days, Düsseldorf, Germany, 15–19 June 2015.
- 25 Iron and Steel Inst. Japan (1979) Handbook of Iron and Steel, vol. 2, Maruzen Publishing Co, Tokyo, p. 306.
- 26Held, B. and Reinitzhuber, F. (1986) Stahl Eisen 106 (22), 1238–1248.
- 27 Ullmann, 4th edn, vol. 10, p. 370.
- 28Manes, M. and Maikay, J.S. (1962) J. Metal. 14, 308–314.
- 29Tokumitsu, N., et al. (1982) Development of Smelting Reduction Process Using an Iron Bath, in Process Technol Conf. Proc, pp. 99–107.
- 30Jeschar, R. and Dombrowski, G. (1998) Summary Evaluation and Assessment of Carbon and Hydrocarbon Raw Materials for Iron Ore Reduction, 1998 ICSTI/Ironmaking Conf. Proc., pp. 431–441.
- 31 Iron and Steel Inst. Japan (1979) Handbook of Iron and Steel, vol. 2, Maruzen Publishing Co, Tokyo, p. 110.
- 32 Iron and Steel Inst. Japan (1979) Handbook of Iron and Steel, vol. 2, Maruzen Publishing Co, Tokyo, p. 120.
- 33Lüngen, H.B., Peters, M., and Schmöle, P. (2017) Ironmaking in Western Europe. Proceedings 3rd ESTAD, Vienna, Austria, 26–29 June.
- 34 Source of Data (2010) Production and Technology of Iron and Steel in Japan, ISIJ Int. (6), 50, 782.
- 35Heynert, G., Ischebeck, P. and Spee, W.V. (1961) Stahl Eisen 81, 1–12.
- 36Nakamura, M., Sugiyama, T., Uno, T., et al. (1977) Tetsu to Hagane 63, 28–36.
10.2355/tetsutohagane1955.63.1_28 Google Scholar
- 37Hatano, M., Kurita, K., and Yanaka, T. (1981) Int'l Blast Furnace Hearth and Raceway Symposium, Newcastle AIMM, pp. 4.1–4.10.
- 38Takeda, K., et al. (1987) Proc. Ironmaking Conf 46, 191–198.
- 39VDEh Blast Furnace Committee, 1995.
- 40 Iron and Steel Inst. Japan (1979) Handbook of Iron and Steel, vol. 2, 159, Maruzen Publishing Co., Tokyo, p. 160.
- 41Hartig, W., Langner, K., Lüngen, H.B. and Stricker, K.P. (1996) Measures for Increasing the Productivity of Blast Furnaces, MPT Int. 4, 42–51.
- 42Peters, K.H., Mohnkern, H., and Lüngen, H.B. (1994) Ways and means for low coke blast furnace operation, Proc. 1st Int. Congr. Sci. Technol. Ironmaking, Sendai, pp. 493–499.
- 43Lüngen, H.B. and Schmöle, P. (2018) Comparison of Blast Furnace Operation Modes in the World, Proceedings 8th ICSTI, Vienna, Austria, 25–28 September.
- 44Lindenberg, H.-U., et al. (1996) Rohstoffliches Recycling von Kunststoffen als Reduktionsmittel im Hochofen, Stahl Eisen 116 (8), 89–93.
- 45Peters, K.H., Beppler, E., Korthas, B., and Peters, M. (1991) Effect of High Levels of Coal Injection on Blast Furnace Operating, Proc. 2nd EIC, pp. 247–263.
- 46Ohno, Y., et al. (1988) 7th Process Tech. Conf. Proceedings, Toronto, pp. 195– 01.
- 47 Gmelin-Durrer (1964) Metallurgie des Eisen, 4th edn, vols. 4a and b, Verlag Chemie, Weinheim.
- 48Schenk, H. (1963) Stahl Eisen 83, 1683–1690.
- 49Wysocki, H. (1975) Vorlesung Entwerfen von Hüttenwerksanlagen, Techn. Univ, Berlin.
- 50 Iron and Steel Inst. Japan (1979) Handbook of Iron and Steel, vol. 2, Maruzen Publishing Co, Tokyo, pp. 278–300.
- 51(1996) Properties and Effective Uses of Iron and Steel Slag, Nippon Slag Association, Tokyo.
- 52Institut für Baustoffforschung, Duisburg, Germany, Report 1/2018, p. 34
- 53Saino, M. (1987) 116th and 117th Nishiyama Memorial Seminar organized by Iron Steel Institute, Japan, pp. 237–278.
- 54Hara, Y., Sakawa, M. and Kondo, S. (1976) Tetsu to Hagane 62, 315–323.
- 55 Iron and Steel Inst. Japan (1987) Blast Furnace Phenomena and Modeling, (ed. 127), Elsevier, London, p. 121, 132–133.
- 56Ranz, W.E. (1952) Chem. Eng. Prog. 48, 247–253.
- 57Kudoh, J. and Yagi, J. (1987) Tetsu to Hagane 73, 2020–2027.
- 58Yagi, J. and Muchi, I. (1970) Trans. Iron Steel Inst. Jpn. 10, 392–405.
- 59Hatano, M. and Kurita, K. (1980) Tetsu to Hagane 66, 1898–1907.
- 60Kuwabara, M., et al. (1983) Proc. Joint Symp. of Iron Steel Inst. Jpn. and Australasian Institute Mining and Metallurgy, Tokyo, pp. 193–204.
- 61Taguchi, S., et al. (1982) Tetsu to Hagane 68, 2302–2310.
- 62Hatano, M., Kurita, K., Yamaoka, H. and Yokoi, T. (1985) Trans. Iron Steel Inst. Jpn. 25, 933–940.
- 63Okuno, Y., et al. (1987) Tetsu to Hagane 73, 91–98.
- 64Sugiyama, T., Yagi, J., and Omori, Y. (1978) Proc. 3rd Int'l Iron Steel Congr., Chicago, pp. 479–488.
- 65Ohno, J., et al. (1981) International Blast Furnace Hearth & Raceway Symposium, Newcastle, Australia, pp. 10–12.
- 66Poos, A. (1967) Heat and Mass Transfer in Process Metallurgy, A. W. D. Hills, pp. 1–38.
- 67Hatano, M., Kurita, K., Yamaoka, H. and Yokoi, T. (1973) Developments in Ironmaking Practice, The Iron and Steel Institute, London, pp. 941–948.
- 68Sugiyama, T., et al. (1988) Curr. Adv. Mater. Proc. (in Japanese) 1, 22–25.
- 69Yagi, J. and Akiyama, T. (1989) Curr. Adv. Mater. Proc. (in Japanese) 2, 2.
- 70Nakagawa, A. (1986) Tekkokai 6, 5–9. issued by The Japan Iron and Steel Federation.
- 71Peters, K.H. and Lüngen, H.B. (1990) Economical Hot Metal Production in the Blast Furnace as Basis for Crude Steel Production in an Integrated Iron and Steel Works, Proc. 6th Int. Iron Steel Congr., Nagoya, ISIJ, Preprint vol. 5, pp. 302–310.
- 72Ameling, D., Baer, H., Bertling, H. and Lüngen, H.B. (1998) Cokemaking Technology 2000 — State-of-the-art-technology and new structures, MPT Int. 5, 46–56.
- 73 Iron and Steel Inst. Japan (1979) Handbook of Iron and Steel, vol. 2, Maruzen Publishing Co, Tokyo, p. 443.
- 74Wahlster, M., Schulz, H.P. and Thein, J. (1969) Stahl Eisen 89, 478–486.
- 75 Iron and Steel Inst. Japan (1979) Handbook of Iron and Steel, vol. 2, Maruzen Publishing Co, Tokyo, p. 450.
- 76Domalski, W., Fabian, K. and Nolle, D. (1968) Stahl Eisen 88, 906–919.
- 77Schulz, H.P. (1969) Stahl Eisen 89, 249–262.
- 78Eketorp, S. and Kalling, B. (1959) Giesserei 46, 905–912.
- 79 Iron and Steel Inst. Japan (1979) Handbook of Iron and Steel, vol. 2, Maruzen Publishing Co, Tokyo, p. 446.
- 80Kajioka, H. (1975) Symposium on External Desulphurizations of Hot Metal, (ed. W.K. Lu), McMaster Univ., Hamilton, pp. 15-1–15-35.
- 81Meichsner, W., Peters, K.H., Ullrich, W. and Knahl, H. (1974) J. Met. 26 (4), 55–58.
- 82 Iron and Steel Inst. Japan (1979) Handbook of Iron and Steel, vol. 2, Maruzen Publishing Co, Tokyo, p. 441.
- 83 Iron and Steel Inst. Japan (1979) Handbook of Iron and Steel, vol. 2, Maruzen Publishing Co, Tokyo, p. 448.
- 84Nashiwa, H., Yamaguchi, S., Takano, M. and Iwami, M. (1975) Sumitomo Kinzoku 27, 207–211.
- 85Duquette, W.H. (1973) Open Hearth Conf. Proc., vol. 56, TMS-AIME, p. 79.
- 86Potocic, P.F. and Leewis, K.G. (1959) Giesserei 46, 3-1–3-19.
- 87Voronova, W.A. (1974) Steel USSR 4, 261.
- 88Nelson, L.G. (1975) Proc. Ironmaking Conf, vol. 34, pp. 451–459.
- 89Koros, P. and Petrushka, R.G. (1975) Sumitomo Kinzoku 27, 7-1–7-25.
- 90Lackmann, H. (1973) 4. Dozentenseminar des Vereins Deutscher Eisenhüttenleute, Gelsenkirchen.
- 91European Blast Furnace Committee and VDEh Blast Furnace Committee, Data Exchange of Sinter Plants and Blast Furnace, 1997/1998.
Further Reading
- Bhadeshia, H.K.D.H. and Honeycombe, R. (2006) Steels. Microstructure and Properties, 3rd edn, Elsevier/Butterworth-Heinemann, Amsterdam.
- Brandt, D.A. and Warner, J.C. (2009) Metallurgy Fundamentals, 5th edn, Goodheart-Willcox, Tinley Park, IL.
- Enghag, P. (2004) Encyclopedia of the Elements, Wiley-VCH Verlag, Weinheim.
10.1002/9783527612338 Google Scholar
- Krauss, G. (2005) Steels. Processing, Structure, and Performance, ASM International, Materials Park, OH.
- Lepinski, J.A., Jeffrey, C. and Myers, G.H.G. (2005) Iron, Kirk Othmer Encyclopedia of Chemical Technology, 5th edn, vol. 14, J. Wiley & Sons, Hoboken, NJ, pp. 490–529 (February 2005).
