Abstract
The sections in this article are
- 1 Bridge Networks
- 2 Dc Bridge Instruments
- 3 Ac Bridge Instruments
- 4 Acknowledgments
Bibliography
- 1 B. J. Pritchard G. W. Small Temperature coefficient variations in heat treated evanohm and their effect on the transient behavior of the NML 1 Ω resistors, IEEE Trans. Instrum. Meas., 42: 557–561, 1993.
- 2 F. Wenner Methods, apparatus and procedures for the comparison of precision standard resistors, J. Res. Nat. Bur. Stand., 25 (8): 230–294, 1940.
- 3 B. Hague Alternating Current Bridge Methods, 6th ed., London: Pitman, 1971.
- 4 K. F. Harris Electrical Measurements, New York: Wiley, 1952.
- 5 T. Sugiyama K. Yamaguchi Pulsewidth modulation dc potentiometer, IEEE Trans. Instrum. Meas., 19: 286–290, 1970.
- 6 L. C. A. Henderson A new technique for the automated measurement of high value resistors, J. Phys. E: Sci. Instrum., 20 (5): 492–495, 1987.
- 7 D. G. Jarret Automated guarded bridge for calibration of multimegohm standard resistors from 1 MΩ to 1 TΩ, IEEE Trans. Instrum. Meas., 46: 325–328, 1997.
- 8 I. Warshawsky Multiple-bridge circuits for measurements of small changes in resistance, Rev. Sci. Instrum., 26 (7): 711–715, 1955.
- 9 F. Delahaye Dc and ac techniques for resistance and impedance measurements, Metrologia, 29 (2): 82–93, 1992.
- 10
N. L. Kusters
W. J. M. Moore
P. N. Miljanic
A current comparator for the precision measurement of dc ratios,
IEEE Trans. Commun. Electron.,
83:
22–27,
1964.
10.1109/TCOME.1964.6539564 Google Scholar
- 11 W. J. M. Moore P. N. Miljanic The Current Comparator, London: Peter Peregrinus Ltd., 1988.
- 12 J. Williams A. Matthews Y. Xu Maintaining the primary standard of resistance using a cryogenic current comparator, Cal Lab, 3 (1): 12–16, 1996.
- 13 V. Polushkin D. Drung H. Koch A broadband picovoltmeter based on the direct current superconducting quantum interference device with additional positive feedback, Rev. Sci. Instrum., 65 (9): 3005–3011, 1994.
- 14 H. W. Ott Noise Reduction Techniques in Electronic Systems, 2nd ed., New York: Wiley, 1988.
- 15 A. Hamon 1–100 Ω build-up resistor for the calibration of standard resistors, J. Sci. Instrum., 31 (12): 450–453, 1954.
- 16 D. R. White J. M. Williams Resistance network for verifying the accuracy of resistance bridges, IEEE Trans. Instrum. Meas., 46: 329–332, 1997.
- 17
R. D. Cutkosky
Four-terminal-pair networks as precision admittance and impedance standards,
IEEE Trans. Commun. Electron.,
83:
19–22,
1964.
10.1109/TCOME.1964.6539563 Google Scholar
- 18 B. P. Kibble G. H. Rayner Coaxial ac Bridges, Bristol: Adam Hilger Ltd., 1984.
- 19 R. B. D. Knight A precision bridge for resistance thermometry using single inductive current divider, Euromeas 77, IEE Conf. Pub. 152, 1977.
- 20 S. Avramov et al. Automatic inductive voltage divider bridge for operation from 10 Hz to 100 kHz, IEEE Trans. Instrum. Meas., 42: 131–135, 1993.
- 21 F. Delahaye D. Bournaud Accurate ac measurements of standard resistors, IEEE Trans. Instrum. Meas., 42: 287–291, 1993.
- 22 W. J. M. Moore K. Ayukawa A current comparator bridge for power measurement, IEEE Trans. Instrum. Meas., 25: 550–553, 1976.
- 23 HP 4284A Precision LCR Meter, Operation Manual: 6–9, Fig. 6-6.
- 24 D. Tarach G. Trenkler A noise-adaptive digital null detector, IEEE Trans. Instrum. Meas., 46: 435–438, 1997.
- 25 D. R. White et al. A simple resistance network for calibrating resistance bridges, submitted for publication in IEEE Trans. Instrum. Meas.
Citing Literature
Wiley Encyclopedia of Electrical and Electronics Engineering
Browse other articles of this reference work:
